CCTVPLANNER.IO · CAMERA · VIVOTEK

    Vivotek IP9172-LPC

    Bullet Camera with 3.1MP (2048×1536) resolution, 35.8° field of view, and 25m IR night vision range.

    NO.01
    3.1MP
    Resolution
    NO.02
    35.8°
    Horizontal FOV
    NO.03
    29m
    Effective Range
    NO.04
    25m
    IR Range

    SPECIFICATIONS · IP9172-LPC

    Specifications

    Resolution3.1MP (2048×1536)
    Focal Length12-40mm
    Horizontal FOV35.8°
    Effective Range29m
    IR Range25m
    TypeBullet Camera
    Low LightStandard

    Verified specifications sourced from the official manufacturer datasheet.

    View official datasheet

    Are you the manufacturer of this camera?

    Verify the specifications of your Vivotek models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.

    Verify your specs

    About the Vivotek IP9172-LPC

    The Vivotek IP9172-LPC is a long-distance bullet body that mounts cleanly under eaves, on poles, or along fencelines. 4MP sits in the sweet spot for installations where storage is a concern but you still want crisper retroactive zooming during incident review. Medium IR range (20-40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A narrow field of view trades coverage area for pixel density at distance, the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations.

    Best use cases for this camera

    Long corridor & aisle monitoring

    The 35.8° narrow angle is intentionally tuned for corridor work: it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.

    License plate / ANPR

    The combination of 35.8° narrow angle and 3.1MP (2048×1536) resolution provides the pixel density required for ANPR at typical lane widths, especially when paired with proper lane lighting and perpendicular mounting.

    Strengths

      Considerations

      • •Narrow angle requires more cameras to cover wide areas; plan camera count accordingly

      Coverage at Different Distances

      DistanceCoverage WidthCoverage AreaUse Case
      5m3.2m16 m²Entrance, corridor
      10m6.5m65 m²Room, retail aisle
      15m9.7m145 m²Warehouse, parking row
      20m12.9m258 m²Parking row, courtyard
      30m19.4m581 m²Parking lot, yard
      50m32.3m1615 m²Perimeter, large area

      Field of View Visualization

      25 m50 m75 m100 m125 m29 mIR 25 mCamera · 35.8° FOV
      Detect127 mObserve51 mRecognize25 mIdentify13 mEffective rangeIR range (25m)

      Night Vision Performance

      Daytime

      Full 3.1MP (2048×1536) resolution at 35.8° field of view. Effective identification range up to 15m in good lighting conditions.

      Nighttime (IR)

      Built-in IR LEDs illuminate up to 25m in complete darkness. Switches to B/W mode for clear night footage.

      Installation tips for the IP9172-LPC

      1

      Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.

      2

      Plan cabling for multiple cameras to cover wide areas: at 35.8° you cover roughly 6 m of width per camera at 10 m distance.

      Coverage geometry & DORI distances

      At a 5-metre standoff the Vivotek IP9172-LPC covers about 3.2 m of scene width; at 10 m that grows to 6.5 m, and at 20 m to 12.9 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 127 m, observe up to 51 m, recognise up to 25 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 13 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 12-40mm lens declared by the manufacturer.

      Detect
      127 m
      Observe
      51 m
      Recognise
      25 m
      Identify
      13 m

      Power & cabling

      The Vivotek IP9172-LPC draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

      Privacy & legal (GDPR / RODO)

      Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

      Installer time & cost (rough estimate)

      A typical EU installer quotes 3-4 h of labour per bullet camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

      Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

      Frequently asked questions

      Is the Vivotek IP9172-LPC suitable for outdoor installation?

      Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Vivotek range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

      What PoE class powers the Vivotek IP9172-LPC?

      The camera draws roughly 7.5 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.

      How much storage does the Vivotek IP9172-LPC consume per day?

      At 3.1MP (2048×1536) resolution, 15 fps H.265 continuous recording, the IP9172-LPC produces approximately 12 GB per day, about 360 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

      Up to what distance can the Vivotek IP9172-LPC identify a person?

      By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 13 m, recognises a person up to 25 m, observes general activity up to 51 m, and detects motion up to 127 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

      What network bandwidth does Vivotek IP9172-LPC use?

      Typical ingest is 5 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

      Related Vivotek Bullet Cameras

      Other Vivotek cameras

      Helpful Tools & Resources

      Plan your layout with Vivotek IP9172-LPC

      Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

      Free until you outgrow it · No card · No install