CCTVPLANNER.IO · CAMERA · VIVOTEK

    Vivotek FD7141V

    Dome Camera with N/A resolution, 32.1° field of view, and 15m IR night vision range.

    NO.01
    N/A
    Resolution
    NO.02
    32.1°
    Horizontal FOV
    NO.03
    N/A
    Effective Range
    NO.04
    15m
    IR Range

    SPECIFICATIONS · FD7141V

    Specifications

    ResolutionN/A
    Focal Length9-22mm
    Horizontal FOV32.1°
    Effective RangeN/A
    IR Range15m
    TypeDome Camera
    Low LightStandard

    Verified specifications sourced from the official manufacturer datasheet.

    View official datasheet

    Are you the manufacturer of this camera?

    Verify the specifications of your Vivotek models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.

    Verify your specs

    About the Vivotek FD7141V

    The Vivotek FD7141V is a tinted-bubble dome that obscures the lens direction, deterring tampering and vandalism. Sub-megapixel resolution is suitable only for general overview footage. It is useful for movement detection but insufficient for facial recognition or license-plate reading. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. A narrow field of view trades coverage area for pixel density at distance, the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations.

    Best use cases for this camera

    Long corridor & aisle monitoring

    The 32.1° narrow angle is intentionally tuned for corridor work: it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.

    Strengths

    • •Vandal-resistant dome housing harder to tamper with than bullet form factor

    Considerations

    • •Short IR range limits night usability to indoor or close-proximity scenarios
    • •Narrow angle requires more cameras to cover wide areas; plan camera count accordingly

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m2.9m14 m²Entrance, corridor
    10m5.8m58 m²Room, retail aisle
    15m8.6m129 m²Warehouse, parking row
    20m11.5m230 m²Parking row, courtyard
    30m17.3m518 m²Parking lot, yard
    50m28.8m1438 m²Perimeter, large area

    Field of View Visualization

    25 m50 m75 m100 m125 mIR 15 mCamera · 32.1° FOV
    Detect133 mObserve53 mRecognize27 mIdentify13 mEffective rangeIR range (15m)

    Night Vision Performance

    Daytime

    Full N/A resolution at 32.1° field of view. Effective identification range up to 0m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 15m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the FD7141V

    1

    Ceiling-mount at 2.5-3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.

    2

    Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.

    3

    Plan cabling for multiple cameras to cover wide areas: at 32.1° you cover roughly 6 m of width per camera at 10 m distance.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Vivotek FD7141V covers about 2.9 m of scene width; at 10 m that grows to 5.8 m, and at 20 m to 11.5 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 131 m, observe up to 52 m, recognise up to 26 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 13 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 9-22mm lens declared by the manufacturer.

    Detect
    131 m
    Observe
    52 m
    Recognise
    26 m
    Identify
    13 m

    Power & cabling

    The Vivotek FD7141V draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3-4 h of labour per dome camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Vivotek FD7141V suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Vivotek range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the Vivotek FD7141V?

    The camera draws roughly 7.5 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.

    Related Vivotek Dome Cameras

    Other Vivotek cameras

    Helpful Tools & Resources

    Plan your layout with Vivotek FD7141V

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install