CCTVPLANNER.IO · CAMERA · UNIVIEW

    Uniview IPC264SA-AHDX4K-AE

    Bullet Camera with N/A resolution, 42.6° field of view, and 120m IR night vision range.

    NO.01
    N/A
    Resolution
    NO.02
    42.6°
    Horizontal FOV
    NO.03
    N/A
    Effective Range
    NO.04
    120m
    IR Range

    SPECIFICATIONS · IPC264SA-AHDX4K-AE

    Specifications

    ResolutionN/A
    Focal Length8-32mm
    Horizontal FOV42.6°
    Effective RangeN/A
    IR Range120m
    TypeBullet Camera
    Low LightStandard

    Verified specifications sourced from the official manufacturer datasheet.

    View official datasheet

    Are you the manufacturer of this camera?

    Verify the specifications of your Uniview models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.

    Verify your specs

    About the Uniview IPC264SA-AHDX4K-AE

    The Uniview IPC264SA-AHDX4K-AE is a weather-sealed bullet housing optimized for perimeter, parking, and exterior building installations. Sub-megapixel resolution is suitable only for general overview footage. It is useful for movement detection but insufficient for facial recognition or license-plate reading. An IR reach above 80 m is unusual for the format and is intended for highway monitoring, large industrial sites, and airport perimeters where conventional cameras would simply lose the target after dark. A narrow field of view trades coverage area for pixel density at distance, the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations.

    Best use cases for this camera

    Long corridor & aisle monitoring

    The 42.6° narrow angle is intentionally tuned for corridor work: it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.

    Strengths

    • •120m IR range eliminates the need for external night-time illuminators

    Considerations

    • •Narrow angle requires more cameras to cover wide areas; plan camera count accordingly

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m3.9m19 m²Entrance, corridor
    10m7.8m78 m²Room, retail aisle
    15m11.7m175 m²Warehouse, parking row
    20m15.6m312 m²Parking row, courtyard
    30m23.4m702 m²Parking lot, yard
    50m39.0m1949 m²Perimeter, large area

    Field of View Visualization

    20 m40 m60 m80 m100 mIR 120 mCamera · 42.6° FOV
    Detect98 mObserve39 mRecognize20 mIdentify10 mEffective rangeIR range (120m)

    Night Vision Performance

    Daytime

    Full N/A resolution at 42.6° field of view. Effective identification range up to 0m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 120m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the IPC264SA-AHDX4K-AE

    1

    Avoid mounting under direct ceiling lights or behind glass: both reflect IR back into the lens and create severe glare in the image.

    2

    Plan cabling for multiple cameras to cover wide areas: at 42.6° you cover roughly 8 m of width per camera at 10 m distance.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Uniview IPC264SA-AHDX4K-AE covers about 3.9 m of scene width; at 10 m that grows to 7.8 m, and at 20 m to 15.6 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 97 m, observe up to 39 m, recognise up to 19 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 10 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 8-32mm lens declared by the manufacturer.

    Detect
    97 m
    Observe
    39 m
    Recognise
    19 m
    Identify
    10 m

    Power & cabling

    The Uniview IPC264SA-AHDX4K-AE draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3-4 h of labour per bullet camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Uniview IPC264SA-AHDX4K-AE suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Uniview range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the Uniview IPC264SA-AHDX4K-AE?

    The camera draws roughly 12.0 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.

    Related Uniview Bullet Cameras

    Other Uniview cameras

    Helpful Tools & Resources

    Plan your layout with Uniview IPC264SA-AHDX4K-AE

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install