CCTVPLANNER.IO · CAMERA · TVT
TVT TD-5422E1-VT1-A(3/PE)
Bullet Camera with 0.0MP (256×192) resolution and 56° field of view.
SPECIFICATIONS · TD-5422E1-VT1-A(3/PE)
Specifications
Verified specifications sourced from the official manufacturer datasheet.
View official datasheetAre you the manufacturer of this camera?
Verify the specifications of your TVT models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.
About the TVT TD-5422E1-VT1-A(3/PE)
The TVT TD-5422E1-VT1-A(3/PE) is a weather-sealed bullet housing optimized for perimeter, parking, and exterior building installations. Sub-megapixel resolution is suitable only for general overview footage. It is useful for movement detection but insufficient for facial recognition or license-plate reading. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A standard 50-80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.
Best use cases for this camera
General surveillance
Suited to general-purpose monitoring tasks with 56° of horizontal coverage.
Strengths
Considerations
- •No built-in IR, so it needs external illumination for night use
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 5.3m | 27 m² | Entrance, corridor |
| 10m | 10.6m | 106 m² | Room, retail aisle |
| 15m | 16.0m | 239 m² | Warehouse, parking row |
| 20m | 21.3m | 425 m² | Parking row, courtyard |
| 30m | 31.9m | 957 m² | Parking lot, yard |
| 50m | 53.2m | 2659 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 0.0MP (256×192) resolution at 56° field of view. Effective identification range up to 0m in good lighting conditions.
Nighttime (IR)
No built-in IR: at night it needs ambient light or an external illuminator. Switches to B/W mode for clear night footage.
Coverage geometry & DORI distances
At a 5-metre standoff the TVT TD-5422E1-VT1-A(3/PE) covers about 5.3 m of scene width; at 10 m that grows to 10.6 m, and at 20 m to 21.3 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 10 m, observe up to 4 m, recognise up to 2 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 1 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 3.2mm lens declared by the manufacturer.
Power & cabling
The TVT TD-5422E1-VT1-A(3/PE) draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3-4 h of labour per bullet camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the TVT TD-5422E1-VT1-A(3/PE) suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the TVT range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the TVT TD-5422E1-VT1-A(3/PE)?
The camera draws roughly 5.5 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.
Related TVT Bullet Cameras
Other TVT cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online, no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with TVT TD-5422E1-VT1-A(3/PE)
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install