CCTVPLANNER.IO · CAMERA · TRENDNET
TRENDnet TV-IP262P
Dome Camera with 1.3MP (1280×1024) resolution, 63° field of view, and 0m IR night vision range.
SPECIFICATIONS · TV-IP262P
Specifications
Verified specifications sourced from the official manufacturer datasheet.
View official datasheetAre you the manufacturer of this camera?
Verify the specifications of your TRENDnet models and earn the "Confirmed by the manufacturer" badge — shown on these pages and next to your cameras inside the planner installers design with. Free of charge.
About the TRENDnet TV-IP262P
The TRENDnet TV-IP262P is a low-profile dome enclosure that blends into ceilings, vandal-resistant by design and harder to tamper with than bullet cameras. 720p HD resolution captures enough detail for basic identification at close range (under 8 meters) but loses face detail beyond that. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A standard 50–80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.
Best use cases for this camera
General surveillance
Suited to general-purpose monitoring tasks within 10 meters of the mounting point with 63° of horizontal coverage.
Strengths
- •Vandal-resistant dome housing harder to tamper with than bullet form factor
Considerations
- •Resolution limits forensic digital zoom — recorded faces beyond ~12m may not be identifiable
- •No built-in IR — requires external illumination for night use
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 6.1m | 31 m² | Entrance, corridor |
| 10m | 12.3m | 123 m² | Room, retail aisle |
| 15m | 18.4m | 276 m² | Warehouse, parking row |
| 20m | 24.5m | 490 m² | Parking row, courtyard |
| 30m | 36.8m | 1103 m² | Parking lot, yard |
| 50m | 61.3m | 3064 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 1.3MP (1280×1024) resolution at 63° field of view. Effective identification range up to 5m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 0m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the TV-IP262P
Ceiling-mount at 2.5–3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.
Coverage geometry & DORI distances
At a 5-metre standoff the TRENDnet TV-IP262P covers about 6.1 m of scene width; at 10 m that grows to 12.3 m, and at 20 m to 24.5 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 42 m, observe up to 17 m, recognise up to 8 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 4 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 3.6mm lens declared by the manufacturer.
Power & cabling
The TRENDnet TV-IP262P draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the TRENDnet TV-IP262P suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the TRENDnet range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the TRENDnet TV-IP262P?
The camera draws roughly 5.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the TRENDnet TV-IP262P consume per day?
At 1.3MP (1280×1024) resolution, 15 fps H.265 continuous recording, the TV-IP262P produces approximately 5 GB per day — about 150 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the TRENDnet TV-IP262P identify a person?
Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 4 m, recognises a person up to 8 m, observes general activity up to 17 m, and detects motion up to 42 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does TRENDnet TV-IP262P use?
Typical ingest is 2 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related TRENDnet Dome Cameras
Other TRENDnet cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online — no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with TRENDnet TV-IP262P
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install