CCTVPLANNER.IO · CAMERA · TIANDY
Tiandy TC-H332N 9DA-4
Bullet Camera with 3.0MP (2304×1296) resolution, 99.7° field of view, and 15m IR night vision range.
SPECIFICATIONS · TC-H332N 9DA-4
Specifications
Verified specifications sourced from the official manufacturer datasheet.
View official datasheetAre you the manufacturer of this camera?
Verify the specifications of your Tiandy models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.
About the Tiandy TC-H332N 9DA-4
The Tiandy TC-H332N 9DA-4 is a long-distance bullet body that mounts cleanly under eaves, on poles, or along fencelines. 4MP resolution delivers a noticeable detail upgrade over 1080p: on the same lens facial identification reaches about a third farther, and digital zoom on recorded footage stays usable. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. A wide 80-120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.
Best use cases for this camera
Entrance, lobby & vestibule
The 99.7° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.
Strengths
- •99.7° wide field of view reduces the number of cameras needed per area
Considerations
- •Short IR range limits night usability to indoor or close-proximity scenarios
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 11.9m | 59 m² | Entrance, corridor |
| 10m | 23.7m | 237 m² | Room, retail aisle |
| 15m | 35.6m | 533 m² | Warehouse, parking row |
| 20m | 47.4m | 948 m² | Parking row, courtyard |
| 30m | 71.1m | 2134 m² | Parking lot, yard |
| 50m | 118.5m | 5927 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 3.0MP (2304×1296) resolution at 99.7° field of view. Effective identification range up to 4m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 15m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the TC-H332N 9DA-4
Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.
Position so the most important subject (entrance, cash register, gate) is in the center third of the frame, because peripheral pixel density drops with wide angles.
Coverage geometry & DORI distances
At a 5-metre standoff the Tiandy TC-H332N 9DA-4 covers about 11.9 m of scene width; at 10 m that grows to 23.7 m, and at 20 m to 47.4 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 39 m, observe up to 16 m, recognise up to 8 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 4 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 4mm lens declared by the manufacturer.
Power & cabling
The Tiandy TC-H332N 9DA-4 draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3-4 h of labour per bullet camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Tiandy TC-H332N 9DA-4 suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Tiandy range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the Tiandy TC-H332N 9DA-4?
The camera draws roughly 7.5 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Tiandy TC-H332N 9DA-4 consume per day?
At 3.0MP (2304×1296) resolution, 15 fps H.265 continuous recording, the TC-H332N 9DA-4 produces approximately 12 GB per day, about 360 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Tiandy TC-H332N 9DA-4 identify a person?
By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 4 m, recognises a person up to 8 m, observes general activity up to 16 m, and detects motion up to 39 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Tiandy TC-H332N 9DA-4 use?
Typical ingest is 5 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Tiandy Bullet Cameras
TC-A32E2 I/E/C/4mm
2.1MP (1920×1080) · 84° · 30m IR
TC-A32N4 I/E/C/2.8mm/V5.0
2.1MP (1920×1080) · 106° · 30m IR
TC-A34E2 I/E/C/2.8mm
3.7MP (2560×1440) · 106° · 30m IR
TC-A34E4 I/E/C/2.8mm
3.7MP (2560×1440) · 106° · 30m IR
TC-C32GN
2.1MP (1920×1080) · 88° · 50m IR
TC-C32GN I5/E/C/2.8mm/V4.2
2.1MP (1920×1080) · 106° · 30m IR
Other Tiandy cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online, no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Tiandy TC-H332N 9DA-4
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install