CCTVPLANNER.IO · CAMERA · MILESIGHT
Milesight MS-C3763-FPB
Bullet Camera with 3.1MP (2048×1536) resolution, 77° field of view, and 45m IR night vision range.
SPECIFICATIONS · MS-C3763-FPB
Specifications
Verified specifications sourced from the official manufacturer datasheet.
View official datasheetAre you the manufacturer of this camera?
Verify the specifications of your Milesight models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.
About the Milesight MS-C3763-FPB
The Milesight MS-C3763-FPB is a rugged outdoor-grade bullet form factor designed to withstand exposure to weather, vandalism, and direct sunlight. 4MP sits in the sweet spot for installations where storage is a concern but you still want crisper retroactive zooming during incident review. A 50-80 m IR range turns this into a true night-perimeter camera: open yards, fenced lots, and rural properties become practical use cases without supplemental lighting. A standard 50-80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.
Best use cases for this camera
Outdoor perimeter & fenceline
With 45m IR reach and 3.1MP (2048×1536) resolution, this camera covers fences, yards, and approach roads in complete darkness. Mount on poles or eaves at 4-6 m height angled slightly downward.
Strengths
Considerations
- •No notable limitations for the intended class of installations
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 8.0m | 40 m² | Entrance, corridor |
| 10m | 15.9m | 159 m² | Room, retail aisle |
| 15m | 23.9m | 358 m² | Warehouse, parking row |
| 20m | 31.8m | 636 m² | Parking row, courtyard |
| 30m | 47.7m | 1432 m² | Parking lot, yard |
| 50m | 79.5m | 3977 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 3.1MP (2048×1536) resolution at 77° field of view. Effective identification range up to 6m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 45m in complete darkness. Switches to B/W mode for clear night footage.
Coverage geometry & DORI distances
At a 5-metre standoff the Milesight MS-C3763-FPB covers about 8.0 m of scene width; at 10 m that grows to 15.9 m, and at 20 m to 31.8 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 51 m, observe up to 21 m, recognise up to 10 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 5 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the fixed lens declared by the manufacturer.
Power & cabling
The Milesight MS-C3763-FPB draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3-4 h of labour per bullet camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Milesight MS-C3763-FPB suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Milesight range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the Milesight MS-C3763-FPB?
The camera draws roughly 7.5 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Milesight MS-C3763-FPB consume per day?
At 3.1MP (2048×1536) resolution, 15 fps H.265 continuous recording, the MS-C3763-FPB produces approximately 12 GB per day, about 360 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Milesight MS-C3763-FPB identify a person?
By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 5 m, recognises a person up to 10 m, observes general activity up to 21 m, and detects motion up to 51 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Milesight MS-C3763-FPB use?
Typical ingest is 5 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Milesight Bullet Cameras
Other Milesight cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online, no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Milesight MS-C3763-FPB
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install