CCTVPLANNER.IO · CAMERA · LTV

    LTV LTV CNE-611 42

    Dome Camera with 0.9MP (1280×720) resolution, 61° field of view, and 20m IR night vision range.

    NO.01
    0.9MP
    Resolution
    NO.02
    61°
    Horizontal FOV
    NO.03
    9m
    Effective Range
    NO.04
    20m
    IR Range

    SPECIFICATIONS · LTV CNE-611 42

    Specifications

    Resolution0.9MP (1280×720)
    Focal Length3.6mm
    Horizontal FOV61°
    Effective Range9m
    IR Range20m
    TypeDome Camera
    Low LightStandard

    Verified specifications sourced from the official manufacturer datasheet.

    View official datasheet

    Are you the manufacturer of this camera?

    Verify the specifications of your LTV models and earn the "Confirmed by the manufacturer" badge — shown on these pages and next to your cameras inside the planner installers design with. Free of charge.

    Verify your specs

    About the LTV LTV CNE-611 42

    The LTV LTV CNE-611 42 is a low-profile dome enclosure that blends into ceilings, vandal-resistant by design and harder to tamper with than bullet cameras. Sub-megapixel resolution is suitable only for general overview footage — useful for movement detection but insufficient for facial recognition or license-plate reading. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. A standard 50–80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.

    Best use cases for this camera

    General surveillance

    Suited to general-purpose monitoring tasks within 9 meters of the mounting point with 61° of horizontal coverage.

    Strengths

    • •Vandal-resistant dome housing harder to tamper with than bullet form factor

    Considerations

    • •Resolution limits forensic digital zoom — recorded faces beyond ~12m may not be identifiable
    • •Short IR range limits night usability to indoor or close-proximity scenarios

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m5.9m29 m²Entrance, corridor
    10m11.8m118 m²Room, retail aisle
    15m17.7m265 m²Warehouse, parking row
    20m23.6m471 m²Parking row, courtyard
    30m35.3m1060 m²Parking lot, yard
    50m58.9m2945 m²Perimeter, large area

    Field of View Visualization

    10 m20 m30 m40 m9 mIR 20 mCamera · 61° FOV
    Detect43 mObserve17 mRecognize9 mIdentify4 mEffective rangeIR range (20m)

    Night Vision Performance

    Daytime

    Full 0.9MP (1280×720) resolution at 61° field of view. Effective identification range up to 4m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 20m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the LTV CNE-611 42

    1

    Ceiling-mount at 2.5–3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.

    2

    Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.

    Coverage geometry & DORI distances

    At a 5-metre standoff the LTV LTV CNE-611 42 covers about 5.9 m of scene width; at 10 m that grows to 11.8 m, and at 20 m to 23.6 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 43 m, observe up to 17 m, recognise up to 9 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 4 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 3.6mm lens declared by the manufacturer.

    Detect
    43 m
    Observe
    17 m
    Recognise
    9 m
    Identify
    4 m

    Power & cabling

    The LTV LTV CNE-611 42 draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the LTV LTV CNE-611 42 suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the LTV range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the LTV LTV CNE-611 42?

    The camera draws roughly 7.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the LTV LTV CNE-611 42 consume per day?

    At 0.9MP (1280×720) resolution, 15 fps H.265 continuous recording, the LTV CNE-611 42 produces approximately 4 GB per day — about 120 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the LTV LTV CNE-611 42 identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 4 m, recognises a person up to 9 m, observes general activity up to 17 m, and detects motion up to 43 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does LTV LTV CNE-611 42 use?

    Typical ingest is 2 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related LTV Dome Cameras

    Other LTV cameras

    Helpful Tools & Resources

    Plan your layout with LTV LTV CNE-611 42

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install