CCTVPLANNER.IO · CAMERA · I-PRO

    i-PRO WV-X15302A-Z1L

    Bullet Camera with 2.1MP (1920×1080) resolution, 62° field of view, and 250m IR night vision range.

    NO.01
    2.1MP
    Resolution
    NO.02
    62°
    Horizontal FOV
    NO.03
    13m
    Effective Range
    NO.04
    250m
    IR Range

    SPECIFICATIONS · WV-X15302A-Z1L

    Specifications

    Resolution2.1MP (1920×1080)
    Focal Length4.7-47mm
    Horizontal FOV62°
    Effective Range13m
    IR Range250m
    TypeBullet Camera
    Low LightStandard

    Verified specifications sourced from the official manufacturer datasheet.

    View official datasheet

    Are you the manufacturer of this camera?

    Verify the specifications of your i-PRO models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.

    Verify your specs

    About the i-PRO WV-X15302A-Z1L

    The i-PRO WV-X15302A-Z1L is a weather-sealed bullet housing optimized for perimeter, parking, and exterior building installations. 1080p Full HD remains the most widely deployed CCTV resolution in 2026: it balances bandwidth, storage, and detail well, and the lens decides how far it identifies faces, so the DORI distances for this model are the figures to design with. An IR reach above 80 m is unusual for the format and is intended for highway monitoring, large industrial sites, and airport perimeters where conventional cameras would simply lose the target after dark. A standard 50-80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.

    Best use cases for this camera

    Outdoor perimeter & fenceline

    With 250m IR reach and 2.1MP (1920×1080) resolution, this camera covers fences, yards, and approach roads in complete darkness. Mount on poles or eaves at 4-6 m height angled slightly downward.

    Strengths

    • •250m IR range eliminates the need for external night-time illuminators

    Considerations

    • •No notable limitations for the intended class of installations

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m6.0m30 m²Entrance, corridor
    10m12.0m120 m²Room, retail aisle
    15m18.0m270 m²Warehouse, parking row
    20m24.0m481 m²Parking row, courtyard
    30m36.1m1082 m²Parking lot, yard
    50m60.1m3004 m²Perimeter, large area

    Field of View Visualization

    50 m100 m150 m200 m13 mIR 250 mCamera · 62° FOV
    Detect64 mObserve26 mRecognize13 mIdentify6 mEffective rangeIR range (250m)

    Night Vision Performance

    Daytime

    Full 2.1MP (1920×1080) resolution at 62° field of view. Effective identification range up to 6m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 250m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the WV-X15302A-Z1L

    1

    Avoid mounting under direct ceiling lights or behind glass: both reflect IR back into the lens and create severe glare in the image.

    Coverage geometry & DORI distances

    At a 5-metre standoff the i-PRO WV-X15302A-Z1L covers about 6.0 m of scene width; at 10 m that grows to 12.0 m, and at 20 m to 24.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 64 m, observe up to 26 m, recognise up to 13 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 6 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 4.7-47mm lens declared by the manufacturer.

    Detect
    64 m
    Observe
    26 m
    Recognise
    13 m
    Identify
    6 m

    Power & cabling

    The i-PRO WV-X15302A-Z1L draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3-4 h of labour per bullet camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the i-PRO WV-X15302A-Z1L suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the i-PRO range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the i-PRO WV-X15302A-Z1L?

    The camera draws roughly 12.0 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the i-PRO WV-X15302A-Z1L consume per day?

    At 2.1MP (1920×1080) resolution, 15 fps H.265 continuous recording, the WV-X15302A-Z1L produces approximately 8 GB per day, about 240 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the i-PRO WV-X15302A-Z1L identify a person?

    By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 6 m, recognises a person up to 13 m, observes general activity up to 26 m, and detects motion up to 64 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does i-PRO WV-X15302A-Z1L use?

    Typical ingest is 3 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related i-PRO Bullet Cameras

    Other i-PRO cameras

    Helpful Tools & Resources

    Plan your layout with i-PRO WV-X15302A-Z1L

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install