CCTVPLANNER.IO · CAMERA · I-PRO

    i-PRO WV-SPW631LT

    Bullet Camera with 2.1MP (1920×1080) resolution, 33.5° field of view, and 9m IR night vision range.

    NO.01
    2.1MP
    Resolution
    NO.02
    33.5°
    Horizontal FOV
    NO.03
    26m
    Effective Range
    NO.04
    9m
    IR Range

    SPECIFICATIONS · WV-SPW631LT

    Specifications

    Resolution2.1MP (1920×1080)
    Focal Length9-22mm
    Horizontal FOV33.5°
    Effective Range26m
    IR Range9m
    TypeBullet Camera
    Low LightStandard

    Verified specifications sourced from the official manufacturer datasheet.

    View official datasheet

    Are you the manufacturer of this camera?

    Verify the specifications of your i-PRO models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.

    Verify your specs

    About the i-PRO WV-SPW631LT

    The i-PRO WV-SPW631LT is a rugged outdoor-grade bullet form factor designed to withstand exposure to weather, vandalism, and direct sunlight. 1080p Full HD remains the most widely deployed CCTV resolution in 2026: it balances bandwidth, storage, and detail well, and the lens decides how far it identifies faces, so the DORI distances for this model are the figures to design with. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. A narrow field of view trades coverage area for pixel density at distance, the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations.

    Best use cases for this camera

    Long corridor & aisle monitoring

    The 33.5° narrow angle is intentionally tuned for corridor work: it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.

    Strengths

      Considerations

      • •Short IR range limits night usability to indoor or close-proximity scenarios
      • •Narrow angle requires more cameras to cover wide areas; plan camera count accordingly

      Coverage at Different Distances

      DistanceCoverage WidthCoverage AreaUse Case
      5m3.0m15 m²Entrance, corridor
      10m6.0m60 m²Room, retail aisle
      15m9.0m135 m²Warehouse, parking row
      20m12.0m241 m²Parking row, courtyard
      30m18.1m542 m²Parking lot, yard
      50m30.1m1505 m²Perimeter, large area

      Field of View Visualization

      25 m50 m75 m100 m125 m26 mIR 9 mCamera · 33.5° FOV
      Detect128 mObserve51 mRecognize26 mIdentify13 mEffective rangeIR range (9m)

      Night Vision Performance

      Daytime

      Full 2.1MP (1920×1080) resolution at 33.5° field of view. Effective identification range up to 13m in good lighting conditions.

      Nighttime (IR)

      Built-in IR LEDs illuminate up to 9m in complete darkness. Switches to B/W mode for clear night footage.

      Installation tips for the WV-SPW631LT

      1

      Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.

      2

      Plan cabling for multiple cameras to cover wide areas: at 33.5° you cover roughly 6 m of width per camera at 10 m distance.

      Coverage geometry & DORI distances

      At a 5-metre standoff the i-PRO WV-SPW631LT covers about 3.0 m of scene width; at 10 m that grows to 6.0 m, and at 20 m to 12.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 128 m, observe up to 51 m, recognise up to 26 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 13 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 9-22mm lens declared by the manufacturer.

      Detect
      128 m
      Observe
      51 m
      Recognise
      26 m
      Identify
      13 m

      Power & cabling

      The i-PRO WV-SPW631LT draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

      Privacy & legal (GDPR / RODO)

      Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

      Installer time & cost (rough estimate)

      A typical EU installer quotes 3-4 h of labour per bullet camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

      Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

      Frequently asked questions

      Is the i-PRO WV-SPW631LT suitable for outdoor installation?

      Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the i-PRO range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

      What PoE class powers the i-PRO WV-SPW631LT?

      The camera draws roughly 7.5 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.

      How much storage does the i-PRO WV-SPW631LT consume per day?

      At 2.1MP (1920×1080) resolution, 15 fps H.265 continuous recording, the WV-SPW631LT produces approximately 8 GB per day, about 240 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

      Up to what distance can the i-PRO WV-SPW631LT identify a person?

      By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 13 m, recognises a person up to 26 m, observes general activity up to 51 m, and detects motion up to 128 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

      What network bandwidth does i-PRO WV-SPW631LT use?

      Typical ingest is 3 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

      Related i-PRO Bullet Cameras

      Other i-PRO cameras

      Helpful Tools & Resources

      Plan your layout with i-PRO WV-SPW631LT

      Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

      Free until you outgrow it · No card · No install