CCTVPLANNER.IO · CAMERA · I-PRO

    i-PRO WV-S4176UX

    Panoramic Camera with 9.0MP (2992×2992) resolution and 183° field of view.

    NO.01
    9MP
    Resolution
    NO.02
    183°
    Horizontal FOV
    NO.03
    N/A
    Effective Range
    NO.04
    None
    IR Range

    SPECIFICATIONS · WV-S4176UX

    Specifications

    Resolution9.0MP (2992×2992)
    Focal Length1.4mm
    Horizontal FOV183°
    Effective RangeN/A
    IR RangeNone
    TypePanoramic Camera
    Low LightStandard

    Verified specifications sourced from the official manufacturer datasheet.

    View official datasheet

    Are you the manufacturer of this camera?

    Verify the specifications of your i-PRO models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.

    Verify your specs

    About the i-PRO WV-S4176UX

    The i-PRO WV-S4176UX is a wide-coverage panoramic camera that eliminates blind spots in lobbies, classrooms, retail floors, and warehouses. 4K (8MP) resolution roughly quadruples 1080p pixel count, doubling the identification distance on the same lens and giving forensic-grade digital zoom on archived footage. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. An ultra-wide angle (>120°) captures nearly an entire scene from one position, but pixels per meter drops sharply at the edges, so identification at the periphery is limited.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 183° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Single-camera room coverage

    A single panoramic camera replaces 3-4 conventional cameras when ceiling-mounted in the center of an open space. Ideal for retail floors, classrooms, and small warehouses where simplification of cabling and licensing matters.

    Strengths

    • •9MP sensor preserves detail under digital zoom on recorded footage
    • •183° wide field of view reduces the number of cameras needed per area
    • •Single-camera coverage of full rooms reduces cabling and licensing cost

    Considerations

    • •No built-in IR, so it needs external illumination for night use
    • •Edge distortion and reduced peripheral pixel density limit identification at the corners of the frame
    • •Higher resolution increases storage and bandwidth requirements proportionally; verify NVR capacity
    • •Fisheye distortion requires dewarping in software for natural viewing angles

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m-381.9m-1909 m²Entrance, corridor
    10m-763.8m-7638 m²Room, retail aisle
    15m-1145.7m-17185 m²Warehouse, parking row
    20m-1527.5m-30551 m²Parking row, courtyard
    30m-2291.3m-68739 m²Parking lot, yard
    50m-3818.8m-190942 m²Perimeter, large area

    Field of View Visualization

    10 m20 m30 mCamera · 183° FOV
    Detect37 mObserve15 mRecognize7 mIdentify4 mEffective range

    Night Vision Performance

    Daytime

    Full 9.0MP (2992×2992) resolution at 183° field of view. Effective identification range up to 0m in good lighting conditions.

    Nighttime (IR)

    No built-in IR: at night it needs ambient light or an external illuminator. Switches to B/W mode for clear night footage.

    Installation tips for the WV-S4176UX

    1

    Center-ceiling mount at 2.7-3.5 m gives the most uniform coverage; corner mounts work but waste roughly 25% of the field of view on the wall.

    2

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame, because peripheral pixel density drops with wide angles.

    3

    Plan storage at roughly 36 GB per camera per day for continuous H.265 recording at 15fps, and verify the NVR has sufficient HDD bay capacity.

    Coverage geometry & DORI distances

    Across its 183° view the i-PRO WV-S4176UX images an arc rather than a flat strip: about 16.0 m of arc at 5 m, 31.9 m at 10 m and 63.9 m at 20 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 37 m, observe up to 15 m, recognise up to 7 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 4 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 1.4mm lens declared by the manufacturer.

    Detect
    37 m
    Observe
    15 m
    Recognise
    7 m
    Identify
    4 m

    Power & cabling

    The i-PRO WV-S4176UX draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Panoramic / fisheye coverage almost always captures more than the controller intended, so schedule a privacy mask review after install to blur out staff-only areas, neighbouring premises and any glass that admits a view of third parties.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 4-5 h of labour per panoramic camera of this class (approximately €180-€230 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the i-PRO WV-S4176UX suitable for outdoor installation?

    Most panoramic units in the i-PRO catalogue are IP66/IK10 rated for outdoor use; verify the exact suffix in the model code (e.g. "-W" for weather-rated). Mount under an eave or recessed canopy where possible: direct rainfall on the dome causes droplets that distort the wide-angle image.

    What PoE class powers the i-PRO WV-S4176UX?

    The camera draws roughly 12.0 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the i-PRO WV-S4176UX consume per day?

    At 9.0MP (2992×2992) resolution, 15 fps H.265 continuous recording, the WV-S4176UX produces approximately 36 GB per day, about 1080 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the i-PRO WV-S4176UX identify a person?

    By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 4 m, recognises a person up to 7 m, observes general activity up to 15 m, and detects motion up to 37 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does i-PRO WV-S4176UX use?

    Typical ingest is 14 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related i-PRO Panoramic Cameras

    Other i-PRO cameras

    Helpful Tools & Resources

    Plan your layout with i-PRO WV-S4176UX

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install