Hikvision DS-2TD2636-10

SPECIFICATIONS · DS-2TD2636-10

About the Hikvision DS-2TD2636-10

The Hikvision DS-2TD2636-10 is a weather-sealed bullet housing optimized for perimeter, parking, and exterior building installations. Sub-megapixel resolution is suitable only for general overview footage. It is useful for movement detection but insufficient for facial recognition or license-plate reading. Medium IR range (20-40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A standard 50-80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.

Best use cases for this camera

Coverage at Different Distances

Field of View Visualization

See these zones on your own site plan: drop the DS-2TD2636-10 onto a map

Night Vision Performance

Installation tips for the DS-2TD2636-10

Coverage geometry & DORI distances

At a 5-metre standoff the Hikvision DS-2TD2636-10 covers about 5.0 m of scene width; at 10 m that grows to 9.9 m, and at 20 m to 19.9 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 76 m, observe up to 30 m, recognise up to 15 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 8 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the fixed lens declared by the manufacturer.

Power & cabling

The Hikvision DS-2TD2636-10 draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

Privacy & legal (GDPR / RODO)

Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

Installer time & cost (rough estimate)

A typical EU installer quotes 4-5 h of labour per bullet camera of this class (approximately €180-€230 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

Frequently asked questions

Related Hikvision Bullet Cameras

Other Hikvision cameras

Helpful Tools & Resources