CCTVPLANNER.IO · CAMERA · HIKVISION
Hikvision DS-2DP8A440IXG1-LEF/832(F0)
PTZ Camera with 39.9MP (11040×3616) resolution, 360° field of view, and 300m IR night vision range. Features Super Low Light technology for superior night performance.
SPECIFICATIONS · DS-2DP8A440IXG1-LEF/832(F0)
Specifications
Are you the manufacturer of this camera?
Verify the specifications of your Hikvision models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.
About the Hikvision DS-2DP8A440IXG1-LEF/832(F0)
The Hikvision DS-2DP8A440IXG1-LEF/832(F0) is a pan-tilt-zoom platform giving operators the ability to follow targets, scan large areas on auto-tour, and zoom in for identification. Ultra-high resolution above 8MP is reserved for situations where one camera must replace several: large open atriums, parking decks, and stadium seating areas where digital zoom on a single feed substitutes for multiple cameras. An IR reach above 80 m is unusual for the format and is intended for highway monitoring, large industrial sites, and airport perimeters where conventional cameras would simply lose the target after dark. An ultra-wide angle (>120°) captures nearly an entire scene from one position, but pixels per meter drops sharply at the edges, so identification at the periphery is limited. Super Low Light technology pulls usable color out of scenes lit by little more than a streetlight or moonlight, eliminating the need to drop into B/W mode in most night conditions.
Best use cases for this camera
Entrance, lobby & vestibule
The 360° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.
Large area patrol & target tracking
PTZ control enables operator-initiated tracking of suspicious activity, scheduled tours of preset positions overnight, and forensic zoom into recorded footage. Best paired with a wide-angle "overview" camera that triggers the PTZ via analytics.
Strengths
- •39.9MP sensor preserves detail under digital zoom on recorded footage
- •300m IR range eliminates the need for external night-time illuminators
- •Super Low Light sensor maintains color detail in near-darkness
- •360° wide field of view reduces the number of cameras needed per area
- •PTZ control enables operator-driven tracking and pre-set tours
Considerations
- •Edge distortion and reduced peripheral pixel density limit identification at the corners of the frame
- •PTZ cameras only see one direction at a time; pair with a fixed overview camera to avoid blind spots
- •Higher resolution increases storage and bandwidth requirements proportionally; verify NVR capacity
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | -0.0m | -0 m² | Entrance, corridor |
| 10m | -0.0m | -0 m² | Room, retail aisle |
| 15m | -0.0m | -0 m² | Warehouse, parking row |
| 20m | -0.0m | -0 m² | Parking row, courtyard |
| 30m | -0.0m | -0 m² | Parking lot, yard |
| 50m | -0.0m | -0 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 39.9MP (11040×3616) resolution at 360° field of view. Effective identification range up to 300m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 300m in complete darkness. Super Low Light sensor captures colour images in near-darkness.
Installation tips for the DS-2DP8A440IXG1-LEF/832(F0)
Mount above 4 m on a rigid pole or wall bracket. PTZ vibrations are amplified at low mounting heights and degrade image quality during pan operations.
Avoid mounting under direct ceiling lights or behind glass: both reflect IR back into the lens and create severe glare in the image.
Position so the most important subject (entrance, cash register, gate) is in the center third of the frame, because peripheral pixel density drops with wide angles.
Plan storage at roughly 160 GB per camera per day for continuous H.265 recording at 15fps, and verify the NVR has sufficient HDD bay capacity.
Coverage geometry & DORI distances
The Hikvision DS-2DP8A440IXG1-LEF/832(F0) sees the full circle around its mount, so its image is measured along that circle: about 31.4 m of circumference at 5 m, 62.8 m at 10 m and 125.7 m at 20 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 70 m, observe up to 28 m, recognise up to 14 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 7 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 2mm lens declared by the manufacturer.
Power & cabling
The Hikvision DS-2DP8A440IXG1-LEF/832(F0) draws an estimated 60.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3bt Type 3 (Class 5-6, ≤60 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 80 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. The Hikvision DS-2DP8A440IXG1-LEF/832(F0)'s PTZ pan range can sweep into neighbouring properties or public roads; document allowed pan limits in the installation record and configure privacy masks (see Hikvision's web-UI under "Privacy Mask") for any window or doorway you cannot legally surveil.
Installer time & cost (rough estimate)
A typical EU installer quotes 5-6 h of labour per ptz camera of this class (approximately €225-€275 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Hikvision DS-2DP8A440IXG1-LEF/832(F0) suitable for outdoor installation?
Hikvision PTZ models are generally designed for outdoor use with IP66 ingress rating and -30°C to +60°C operating range. Mount on a rigid pole at ≥ 4 m to dampen wind-driven vibration that would degrade the live image during pan operations.
What PoE class powers the Hikvision DS-2DP8A440IXG1-LEF/832(F0)?
The camera draws roughly 60.0 W in steady-state operation, requiring an 802.3bt Type 3 (Class 5-6, ≤60 W) switch port. A single Cat6 STP cable carries both data and power up to 80 m; beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Hikvision DS-2DP8A440IXG1-LEF/832(F0) consume per day?
At 39.9MP (11040×3616) resolution, 15 fps H.265 continuous recording, the DS-2DP8A440IXG1-LEF/832(F0) produces approximately 160 GB per day, about 4800 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Hikvision DS-2DP8A440IXG1-LEF/832(F0) identify a person?
By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 7 m, recognises a person up to 14 m, observes general activity up to 28 m, and detects motion up to 70 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Hikvision DS-2DP8A440IXG1-LEF/832(F0) use?
Typical ingest is 60 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Hikvision PTZ Cameras
DS-2DP8A440IXG1-LEWF/416(F0)
16.0MP (6072×2640) · 180° · 300m IR
DS-2DP8A440IXG1-LEWF/624(F0)
24.0MP (9024×2656) · 270° · 300m IR
DS-2DP8A440IXG1-LEWF/832(F0)
39.9MP (11040×3616) · 360° · 300m IR
DS-2DP8A845IXG-LF/432(F0)
29.5MP (8160×3616) · 180° · 500m IR
DS-2DP8A845IXG-LF/864(F0)
29.5MP (8160×3616) · 180° · 500m IR
DS-2DP8A845IXG1-LEWF/5G/832(F0)
39.9MP (11040×3616) · 360° · 500m IR
Other Hikvision cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online, no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Hikvision DS-2DP8A440IXG1-LEF/832(F0)
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install