CCTVPLANNER.IO · CAMERA · HANWHA
Hanwha XNF-8010RW
Panoramic Camera with 4.2MP (2048×2048) resolution, 192° field of view, and 15m IR night vision range. Features Super Low Light technology for superior night performance.
SPECIFICATIONS · XNF-8010RW
Specifications
Verified specifications sourced from the official manufacturer datasheet.
View official datasheetAre you the manufacturer of this camera?
Verify the specifications of your Hanwha models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.
About the Hanwha XNF-8010RW
The Hanwha XNF-8010RW is a multi-sensor panoramic body that replaces several traditional cameras with one seamless image. 4MP sits in the sweet spot for installations where storage is a concern but you still want crisper retroactive zooming during incident review. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. An ultra-wide angle (>120°) captures nearly an entire scene from one position, but pixels per meter drops sharply at the edges, so identification at the periphery is limited. The Super Low Light sensor is the feature most installers care about for residential and parking-lot use: it preserves identification detail when older cameras lose all color and most contour.
Best use cases for this camera
Entrance, lobby & vestibule
The 192° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.
Single-camera room coverage
A single panoramic camera replaces 3-4 conventional cameras when ceiling-mounted in the center of an open space. Ideal for retail floors, classrooms, and small warehouses where simplification of cabling and licensing matters.
Strengths
- •4.2MP sensor preserves detail under digital zoom on recorded footage
- •Super Low Light sensor maintains color detail in near-darkness
- •192° wide field of view reduces the number of cameras needed per area
- •Single-camera coverage of full rooms reduces cabling and licensing cost
Considerations
- •Short IR range limits night usability to indoor or close-proximity scenarios
- •Edge distortion and reduced peripheral pixel density limit identification at the corners of the frame
- •Fisheye distortion requires dewarping in software for natural viewing angles
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | -95.1m | -476 m² | Entrance, corridor |
| 10m | -190.3m | -1903 m² | Room, retail aisle |
| 15m | -285.4m | -4281 m² | Warehouse, parking row |
| 20m | -380.6m | -7611 m² | Parking row, courtyard |
| 30m | -570.9m | -17126 m² | Parking lot, yard |
| 50m | -951.4m | -47572 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 4.2MP (2048×2048) resolution at 192° field of view. Effective identification range up to 15m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 15m in complete darkness. Super Low Light sensor captures colour images in near-darkness.
Installation tips for the XNF-8010RW
Center-ceiling mount at 2.7-3.5 m gives the most uniform coverage; corner mounts work but waste roughly 25% of the field of view on the wall.
Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.
Position so the most important subject (entrance, cash register, gate) is in the center third of the frame, because peripheral pixel density drops with wide angles.
Plan storage at roughly 17 GB per camera per day for continuous H.265 recording at 15fps, and verify the NVR has sufficient HDD bay capacity.
Coverage geometry & DORI distances
Across its 192° view the Hanwha XNF-8010RW images an arc rather than a flat strip: about 16.8 m of arc at 5 m, 33.5 m at 10 m and 67.0 m at 20 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 24 m, observe up to 10 m, recognise up to 5 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 2 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 1.6mm lens declared by the manufacturer.
Power & cabling
The Hanwha XNF-8010RW draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Panoramic / fisheye coverage almost always captures more than the controller intended, so schedule a privacy mask review after install to blur out staff-only areas, neighbouring premises and any glass that admits a view of third parties.
Installer time & cost (rough estimate)
A typical EU installer quotes 4-5 h of labour per panoramic camera of this class (approximately €180-€230 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Hanwha XNF-8010RW suitable for outdoor installation?
Most panoramic units in the Hanwha catalogue are IP66/IK10 rated for outdoor use; verify the exact suffix in the model code (e.g. "-W" for weather-rated). Mount under an eave or recessed canopy where possible: direct rainfall on the dome causes droplets that distort the wide-angle image.
What PoE class powers the Hanwha XNF-8010RW?
The camera draws roughly 12.0 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Hanwha XNF-8010RW consume per day?
At 4.2MP (2048×2048) resolution, 15 fps H.265 continuous recording, the XNF-8010RW produces approximately 17 GB per day, about 510 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Hanwha XNF-8010RW identify a person?
By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 2 m, recognises a person up to 5 m, observes general activity up to 10 m, and detects motion up to 24 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Hanwha XNF-8010RW use?
Typical ingest is 6 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Hanwha Panoramic Cameras
Other Hanwha cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online, no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Hanwha XNF-8010RW
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install