CCTVPLANNER.IO · CAMERA · GRUNDIG SECURITY
Grundig Security GU-CI-AP20527Q
Panoramic Camera with 4.7MP (2880×1620) resolution, 112° field of view, and 0m IR night vision range.
SPECIFICATIONS · GU-CI-AP20527Q
Specifications
Verified specifications sourced from the official manufacturer datasheet.
View official datasheetAre you the manufacturer of this camera?
Verify the specifications of your Grundig Security models and earn the "Confirmed by the manufacturer" badge — shown on these pages and next to your cameras inside the planner installers design with. Free of charge.
About the Grundig Security GU-CI-AP20527Q
The Grundig Security GU-CI-AP20527Q is a fisheye/panoramic optic that captures a complete 180° or 360° scene from a single ceiling or wall position. 5MP resolution sharpens the image well past 1080p — facial identification extends to roughly 20 meters and retroactive digital zoom on recorded footage stays crisp, without the storage and bandwidth cost of a full 4K stream. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.
Best use cases for this camera
Entrance, lobby & vestibule
The 112° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.
Single-camera room coverage
A single panoramic camera replaces 3–4 conventional cameras when ceiling-mounted in the center of an open space. Ideal for retail floors, classrooms, and small warehouses where simplification of cabling and licensing matters.
Strengths
- •4.7MP sensor preserves detail under digital zoom on recorded footage
- •112° wide field of view reduces the number of cameras needed per area
- •Single-camera coverage of full rooms reduces cabling and licensing cost
Considerations
- •No built-in IR — requires external illumination for night use
- •Fisheye distortion requires dewarping in software for natural viewing angles
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 14.8m | 74 m² | Entrance, corridor |
| 10m | 29.7m | 297 m² | Room, retail aisle |
| 15m | 44.5m | 667 m² | Warehouse, parking row |
| 20m | 59.3m | 1186 m² | Parking row, courtyard |
| 30m | 89.0m | 2669 m² | Parking lot, yard |
| 50m | 148.3m | 7413 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 4.7MP (2880×1620) resolution at 112° field of view. Effective identification range up to 4m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 0m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the GU-CI-AP20527Q
Center-ceiling mount at 2.7–3.5 m gives the most uniform coverage; corner mounts work but waste roughly 25% of the field of view on the wall.
Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.
Plan storage at roughly 19 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.
Coverage geometry & DORI distances
At a 5-metre standoff the Grundig Security GU-CI-AP20527Q covers about 14.8 m of scene width; at 10 m that grows to 29.7 m, and at 20 m to 59.3 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 39 m, observe up to 16 m, recognise up to 8 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 4 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 2.8-12mm lens declared by the manufacturer.
Power & cabling
The Grundig Security GU-CI-AP20527Q draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Panoramic / fisheye coverage almost always captures more than the controller intended — schedule a privacy mask review after install to blur out staff-only areas, neighbouring premises and any glass that admits a view of third parties.
Installer time & cost (rough estimate)
A typical EU installer quotes 4–5 h of labour per panoramic camera of this class (approximately €180–€230 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Grundig Security GU-CI-AP20527Q suitable for outdoor installation?
Most panoramic units in the Grundig Security catalogue are IP66/IK10 rated for outdoor use — verify the exact suffix in the model code (e.g. "-W" for weather-rated). Mount under an eave or recessed canopy where possible: direct rainfall on the dome causes droplets that distort the wide-angle image.
What PoE class powers the Grundig Security GU-CI-AP20527Q?
The camera draws roughly 12.0 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Grundig Security GU-CI-AP20527Q consume per day?
At 4.7MP (2880×1620) resolution, 15 fps H.265 continuous recording, the GU-CI-AP20527Q produces approximately 19 GB per day — about 570 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Grundig Security GU-CI-AP20527Q identify a person?
Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 4 m, recognises a person up to 8 m, observes general activity up to 16 m, and detects motion up to 39 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Grundig Security GU-CI-AP20527Q use?
Typical ingest is 7 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Grundig Security Panoramic Cameras
Other Grundig Security cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online — no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Grundig Security GU-CI-AP20527Q
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install