CCTVPLANNER.IO · CAMERA · BOSCH
Bosch MIC IP fusion 9000i (MIC-9803S-Z30G14V)
PTZ Camera with N/A resolution and 31° field of view.
SPECIFICATIONS · MIC IP FUSION 9000I (MIC-9803S-Z30G14V)
Specifications
These figures are from our earlier catalogue and have not yet been confirmed against Bosch's own datasheet.
Are you the manufacturer of this camera?
Verify the specifications of your Bosch models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.
About the Bosch MIC IP fusion 9000i (MIC-9803S-Z30G14V)
The Bosch MIC IP fusion 9000i (MIC-9803S-Z30G14V) is a pan-tilt-zoom platform giving operators the ability to follow targets, scan large areas on auto-tour, and zoom in for identification. Sub-megapixel resolution is suitable only for general overview footage. It is useful for movement detection but insufficient for facial recognition or license-plate reading. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A narrow field of view trades coverage area for pixel density at distance, the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations.
Best use cases for this camera
Long corridor & aisle monitoring
The 31° narrow angle is intentionally tuned for corridor work: it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.
Large area patrol & target tracking
PTZ control enables operator-initiated tracking of suspicious activity, scheduled tours of preset positions overnight, and forensic zoom into recorded footage. Best paired with a wide-angle "overview" camera that triggers the PTZ via analytics.
Strengths
- •PTZ control enables operator-driven tracking and pre-set tours
- •80m effective range supports outdoor perimeter and parking-lot deployments
Considerations
- •No built-in IR, so it needs external illumination for night use
- •Narrow angle requires more cameras to cover wide areas; plan camera count accordingly
- •PTZ cameras only see one direction at a time; pair with a fixed overview camera to avoid blind spots
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 2.8m | 14 m² | Entrance, corridor |
| 10m | 5.5m | 55 m² | Room, retail aisle |
| 15m | 8.3m | 125 m² | Warehouse, parking row |
| 20m | 11.1m | 222 m² | Parking row, courtyard |
| 30m | 16.6m | 499 m² | Parking lot, yard |
| 50m | 27.7m | 1387 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full N/A resolution at 31° field of view. Effective identification range up to 80m in good lighting conditions.
Nighttime (IR)
No built-in IR: at night it needs ambient light or an external illuminator. Switches to B/W mode for clear night footage.
Installation tips for the MIC IP fusion 9000i (MIC-9803S-Z30G14V)
Mount above 4 m on a rigid pole or wall bracket. PTZ vibrations are amplified at low mounting heights and degrade image quality during pan operations.
Plan cabling for multiple cameras to cover wide areas: at 31° you cover roughly 6 m of width per camera at 10 m distance.
Coverage geometry & DORI distances
At a 5-metre standoff the Bosch MIC IP fusion 9000i (MIC-9803S-Z30G14V) covers about 2.8 m of scene width; at 10 m that grows to 5.5 m, and at 20 m to 11.1 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 136 m, observe up to 54 m, recognise up to 27 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 14 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the fixed lens declared by the manufacturer.
Power & cabling
The Bosch MIC IP fusion 9000i (MIC-9803S-Z30G14V) draws an estimated 30.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3at (Class 4, ≤30 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. The Bosch MIC IP fusion 9000i (MIC-9803S-Z30G14V)'s PTZ pan range can sweep into neighbouring properties or public roads; document allowed pan limits in the installation record and configure privacy masks (see Bosch's web-UI under "Privacy Mask") for any window or doorway you cannot legally surveil.
Installer time & cost (rough estimate)
A typical EU installer quotes 5-6 h of labour per ptz camera of this class (approximately €225-€275 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Bosch MIC IP fusion 9000i (MIC-9803S-Z30G14V) suitable for outdoor installation?
Bosch PTZ models are generally designed for outdoor use with IP66 ingress rating and -30°C to +60°C operating range. Mount on a rigid pole at ≥ 4 m to dampen wind-driven vibration that would degrade the live image during pan operations.
What PoE class powers the Bosch MIC IP fusion 9000i (MIC-9803S-Z30G14V)?
The camera draws roughly 30.0 W in steady-state operation, requiring an 802.3at (Class 4, ≤30 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.
Related Bosch PTZ Cameras
MIC IP fusion 9000i (MIC-9803S-Z30W14V)
N/A · 31°
MIC IP fusion 9000i (MIC-9803S-Z30W18Q)
N/A · 30°
MIC IP fusion 9000i (MIC-9803S-Z30W42V)
N/A · 10°
MIC IP starlight 7100i MIC-7502-Z30
2.1MP (1920×1080) · 62° · 200m IR
MIC IP starlight 7100i MIC-7502-Z30-GOV
2.1MP (1920×1080) · 62° · 200m IR
MIC IP starlight 7100i MIC-7504-Z30
8.3MP (3840×2160) · 62° · 200m IR
Other Bosch cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online, no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Bosch MIC IP fusion 9000i (MIC-9803S-Z30G14V)
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install