CCTVPLANNER.IO · CAMERA · AXIS
Axis P1368-E
Bullet Camera with 8.3MP (3840×2160) resolution and 72° field of view. Features Super Low Light technology for superior night performance.
SPECIFICATIONS · P1368-E
Specifications
Verified specifications sourced from the official manufacturer datasheet.
View official datasheetAre you the manufacturer of this camera?
Verify the specifications of your Axis models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.
About the Axis P1368-E
The Axis P1368-E is a long-distance bullet body that mounts cleanly under eaves, on poles, or along fencelines. 4K (8MP) resolution roughly quadruples 1080p pixel count, doubling the identification distance on the same lens and giving forensic-grade digital zoom on archived footage. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A standard 50-80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion. Super Low Light technology pulls usable color out of scenes lit by little more than a streetlight or moonlight, eliminating the need to drop into B/W mode in most night conditions.
Best use cases for this camera
Entrance, lobby & vestibule
Low-light sensitivity preserves face detail even when interior lighting is dimmed for energy savings. Useful for capturing visitors as they enter and leave.
Strengths
- •8.3MP sensor preserves detail under digital zoom on recorded footage
- •Super Low Light sensor maintains color detail in near-darkness
Considerations
- •No built-in IR, so it needs external illumination for night use
- •Higher resolution increases storage and bandwidth requirements proportionally; verify NVR capacity
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 7.3m | 36 m² | Entrance, corridor |
| 10m | 14.5m | 145 m² | Room, retail aisle |
| 15m | 21.8m | 327 m² | Warehouse, parking row |
| 20m | 29.1m | 581 m² | Parking row, courtyard |
| 30m | 43.6m | 1308 m² | Parking lot, yard |
| 50m | 72.7m | 3633 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 8.3MP (3840×2160) resolution at 72° field of view. Effective identification range up to 11m in good lighting conditions.
Nighttime (IR)
No built-in IR: at night it needs ambient light or an external illuminator. Super Low Light sensor captures colour images in near-darkness.
Installation tips for the P1368-E
Plan storage at roughly 33 GB per camera per day for continuous H.265 recording at 15fps, and verify the NVR has sufficient HDD bay capacity.
Coverage geometry & DORI distances
At a 5-metre standoff the Axis P1368-E covers about 7.3 m of scene width; at 10 m that grows to 14.5 m, and at 20 m to 29.1 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 106 m, observe up to 42 m, recognise up to 21 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 11 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 2.8-8.5mm lens declared by the manufacturer.
Power & cabling
The Axis P1368-E draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3-4 h of labour per bullet camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Axis P1368-E suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Axis range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the Axis P1368-E?
The camera draws roughly 5.5 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Axis P1368-E consume per day?
At 8.3MP (3840×2160) resolution, 15 fps H.265 continuous recording, the P1368-E produces approximately 33 GB per day, about 990 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Axis P1368-E identify a person?
By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 11 m, recognises a person up to 21 m, observes general activity up to 42 m, and detects motion up to 106 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Axis P1368-E use?
Typical ingest is 12 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Axis Bullet Cameras
Other Axis cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online, no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Axis P1368-E
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install