CCTVPLANNER.IO · CAMERA · AVIGILON

    Avigilon 1.3C-H4SL-D1-IR

    Dome Camera with 1.3MP (1280×1024) resolution, 60° field of view, and 10m IR night vision range.

    NO.01
    1.3MP
    Resolution
    NO.02
    60°
    Horizontal FOV
    NO.03
    11m
    Effective Range
    NO.04
    10m
    IR Range

    SPECIFICATIONS · 1.3C-H4SL-D1-IR

    Specifications

    Resolution1.3MP (1280×1024)
    Focal Length3-9mm
    Horizontal FOV60°
    Effective Range11m
    IR Range10m
    TypeDome Camera
    Low LightStandard

    Verified specifications sourced from the official manufacturer datasheet.

    View official datasheet

    Are you the manufacturer of this camera?

    Verify the specifications of your Avigilon models and earn the "Confirmed by the manufacturer" badge, shown on these pages and next to your cameras inside the planner installers design with. Free of charge.

    Verify your specs

    About the Avigilon 1.3C-H4SL-D1-IR

    The Avigilon 1.3C-H4SL-D1-IR is a discreet dome housing well-suited to indoor retail, office, lobby, and educational environments where aesthetics matter. 720p HD resolution captures enough detail for basic identification only at close range: on the same lens it reaches about two thirds of the distance a 1080p camera does, and loses face detail beyond that. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. A standard 50-80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.

    Best use cases for this camera

    General surveillance

    Suited to general-purpose monitoring tasks within 11 meters of the mounting point with 60° of horizontal coverage.

    Strengths

    • •Vandal-resistant dome housing harder to tamper with than bullet form factor

    Considerations

    • •Resolution limits forensic digital zoom; recorded faces beyond ~12m may not be identifiable
    • •Short IR range limits night usability to indoor or close-proximity scenarios

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m5.8m29 m²Entrance, corridor
    10m11.5m115 m²Room, retail aisle
    15m17.3m260 m²Warehouse, parking row
    20m23.1m462 m²Parking row, courtyard
    30m34.6m1039 m²Parking lot, yard
    50m57.7m2887 m²Perimeter, large area

    Field of View Visualization

    10 m20 m30 m40 m11 mIR 10 mCamera · 60° FOV
    Detect44 mObserve18 mRecognize9 mIdentify4 mEffective rangeIR range (10m)

    Night Vision Performance

    Daytime

    Full 1.3MP (1280×1024) resolution at 60° field of view. Effective identification range up to 5m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 10m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the 1.3C-H4SL-D1-IR

    1

    Ceiling-mount at 2.5-3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.

    2

    Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Avigilon 1.3C-H4SL-D1-IR covers about 5.8 m of scene width; at 10 m that grows to 11.5 m, and at 20 m to 23.1 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 44 m, observe up to 18 m, recognise up to 9 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 4 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 3-9mm lens declared by the manufacturer.

    Detect
    44 m
    Observe
    18 m
    Recognise
    9 m
    Identify
    4 m

    Power & cabling

    The Avigilon 1.3C-H4SL-D1-IR draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3-4 h of labour per dome camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Avigilon 1.3C-H4SL-D1-IR suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Avigilon range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the Avigilon 1.3C-H4SL-D1-IR?

    The camera draws roughly 7.5 W in steady-state operation, requiring an 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m; beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the Avigilon 1.3C-H4SL-D1-IR consume per day?

    At 1.3MP (1280×1024) resolution, 15 fps H.265 continuous recording, the 1.3C-H4SL-D1-IR produces approximately 5 GB per day, about 150 GB per month. Motion-only or event-triggered recording typically cuts that by 40-70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the Avigilon 1.3C-H4SL-D1-IR identify a person?

    By the DORI thresholds of EN 62676-4 (Identify at 250 px/m on the target, a density the 2025 edition calls Characterise), this camera reaches Identify level up to about 4 m, recognises a person up to 9 m, observes general activity up to 18 m, and detects motion up to 44 m. Identification distance assumes daylight or full IR illumination on the target; at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does Avigilon 1.3C-H4SL-D1-IR use?

    Typical ingest is 2 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50-100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related Avigilon Dome Cameras

    Other Avigilon cameras

    Helpful Tools & Resources

    Plan your layout with Avigilon 1.3C-H4SL-D1-IR

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install