ACTi TCM-1232

SPECIFICATIONS · TCM-1232

About the ACTi TCM-1232

The ACTi TCM-1232 is a weather-sealed bullet housing optimized for perimeter, parking, and exterior building installations. 720p HD resolution captures enough detail for basic identification only at close range: on the same lens it reaches about two thirds of the distance a 1080p camera does, and loses face detail beyond that. Medium IR range (20-40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A standard 50-80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.

Best use cases for this camera

Coverage at Different Distances

Field of View Visualization

See these zones on your own site plan: drop the TCM-1232 onto a map

Night Vision Performance

Coverage geometry & DORI distances

At a 5-metre standoff the ACTi TCM-1232 covers about 8.0 m of scene width; at 10 m that grows to 15.9 m, and at 20 m to 31.8 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 32 m, observe up to 13 m, recognise up to 6 m, and produce Identify-level detail (250 px/m in the EN 62676-4 DORI scale) up to 3 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic; the geometry above assumes the 3.3-12mm lens declared by the manufacturer.

Power & cabling

The ACTi TCM-1232 draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end; beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

Privacy & legal (GDPR / RODO)

Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland). Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

Installer time & cost (rough estimate)

A typical EU installer quotes 3-4 h of labour per bullet camera of this class (approximately €135-€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

Indicative EU pricing at 2024-2025 rates; actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

Frequently asked questions

Related ACTi Bullet Cameras

Other ACTi cameras

Helpful Tools & Resources