CCTVPLANNER.IO · CAMERA · UNIVIEW

    Uniview UAC-P112-AF40-W

    PTZ Camera with N/A resolution, 83.8° field of view, and 30m IR night vision range.

    NO.01
    N/A
    Resolution
    NO.02
    83.8°
    Horizontal FOV
    NO.03
    20m
    Effective Range
    NO.04
    30m
    IR Range

    SPECIFICATIONS · UAC-P112-AF40-W

    Specifications

    ResolutionN/A
    Focal Length4mm
    Horizontal FOV83.8°
    Effective Range20m
    IR Range30m
    TypePTZ Camera
    Low LightStandard

    Verified specifications sourced from the official manufacturer datasheet.

    View official datasheet

    Are you the manufacturer of this camera?

    Verify the specifications of your Uniview models and earn the "Confirmed by the manufacturer" badge — shown on these pages and next to your cameras inside the planner installers design with. Free of charge.

    Verify your specs

    About the Uniview UAC-P112-AF40-W

    The Uniview UAC-P112-AF40-W is a pan-tilt-zoom platform giving operators the ability to follow targets, scan large areas on auto-tour, and zoom in for identification. Sub-megapixel resolution is suitable only for general overview footage — useful for movement detection but insufficient for facial recognition or license-plate reading. Medium IR range (20–40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 83.8° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Large area patrol & target tracking

    PTZ control enables operator-initiated tracking of suspicious activity, scheduled tours of preset positions overnight, and forensic zoom into recorded footage. Best paired with a wide-angle "overview" camera that triggers the PTZ via analytics.

    Strengths

    • •PTZ control enables operator-driven tracking and pre-set tours

    Considerations

    • •PTZ cameras only see one direction at a time — pair with a fixed overview camera to avoid blind spots

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m9.0m45 m²Entrance, corridor
    10m17.9m179 m²Room, retail aisle
    15m26.9m404 m²Warehouse, parking row
    20m35.9m718 m²Parking row, courtyard
    30m53.8m1615 m²Parking lot, yard
    50m89.7m4486 m²Perimeter, large area

    Field of View Visualization

    10 m20 m30 m40 m20 mIR 30 mCamera · 83.8° FOV
    Detect43 mObserve17 mRecognize9 mIdentify4 mEffective rangeIR range (30m)

    Night Vision Performance

    Daytime

    Full N/A resolution at 83.8° field of view. Effective identification range up to 20m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 30m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the UAC-P112-AF40-W

    1

    Mount above 4 m on a rigid pole or wall bracket — PTZ vibrations are amplified at low mounting heights and degrade image quality during pan operations.

    2

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Uniview UAC-P112-AF40-W covers about 9.0 m of scene width; at 10 m that grows to 17.9 m, and at 20 m to 35.9 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 42 m, observe up to 17 m, recognise up to 8 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 4 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 4mm lens declared by the manufacturer.

    Detect
    42 m
    Observe
    17 m
    Recognise
    8 m
    Identify
    4 m

    Power & cabling

    The Uniview UAC-P112-AF40-W draws an estimated 30.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3at (Class 4, ≤30 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. The Uniview UAC-P112-AF40-W's PTZ pan range can sweep into neighbouring properties or public roads; document allowed pan limits in the installation record and configure privacy masks (see Uniview's web-UI under "Privacy Mask") for any window or doorway you cannot legally surveil.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 5–6 h of labour per ptz camera of this class (approximately €225–€275 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Uniview UAC-P112-AF40-W suitable for outdoor installation?

    Uniview PTZ models are generally designed for outdoor use with IP66 ingress rating and -30°C to +60°C operating range. Mount on a rigid pole at ≥ 4 m to dampen wind-driven vibration that would degrade the live image during pan operations.

    What PoE class powers the Uniview UAC-P112-AF40-W?

    The camera draws roughly 30.0 W in steady-state operation, requiring a 802.3at (Class 4, ≤30 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    Related Uniview PTZ Cameras

    Other Uniview cameras

    Helpful Tools & Resources

    Plan your layout with Uniview UAC-P112-AF40-W

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install