Uniview UAC-D312-AZLM

SPECIFICATIONS · UAC-D312-AZLM

About the Uniview UAC-D312-AZLM

The Uniview UAC-D312-AZLM is a tinted-bubble dome that obscures the lens direction, deterring tampering and vandalism. Sub-megapixel resolution is suitable only for general overview footage — useful for movement detection but insufficient for facial recognition or license-plate reading. Medium IR range (20–40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.

Best use cases for this camera

Coverage at Different Distances

Field of View Visualization

See these zones on your own site plan — drop the UAC-D312-AZLM onto a map

Night Vision Performance

Installation tips for the UAC-D312-AZLM

Coverage geometry & DORI distances

At a 5-metre standoff the Uniview UAC-D312-AZLM covers about 10.2 m of scene width; at 10 m that grows to 20.5 m, and at 20 m to 40.9 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 37 m, observe up to 15 m, recognise up to 7 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 4 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 2.8-12mm lens declared by the manufacturer.

Power & cabling

The Uniview UAC-D312-AZLM draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

Privacy & legal (GDPR / RODO)

Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

Installer time & cost (rough estimate)

A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

Frequently asked questions

Related Uniview Dome Cameras

Other Uniview cameras

Helpful Tools & Resources