CCTVPLANNER.IO · CAMERA · WISENET
Wisenet Wisenet QNO-8030R
Bullet Camera with 5.0MP (2592×1944) resolution, 60° field of view, and 25m IR night vision range.
SPECIFICATIONS · WISENET QNO-8030R
Specifications
About the Wisenet Wisenet QNO-8030R
The Wisenet Wisenet QNO-8030R is a rugged outdoor-grade bullet form factor designed to withstand exposure to weather, vandalism, and direct sunlight. 5MP resolution sharpens the image well past 1080p — facial identification extends to roughly 20 meters and retroactive digital zoom on recorded footage stays crisp, without the storage and bandwidth cost of a full 4K stream. Medium IR range (20–40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A standard 50–80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.
Best use cases for this camera
General surveillance
Suited to general-purpose monitoring tasks within 21 meters of the mounting point with 60° of horizontal coverage.
Strengths
- •5MP sensor preserves detail under digital zoom on recorded footage
Considerations
- •No notable limitations for the intended class of installations
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 5.8m | 29 m² | Entrance, corridor |
| 10m | 11.5m | 115 m² | Room, retail aisle |
| 15m | 17.3m | 260 m² | Warehouse, parking row |
| 20m | 23.1m | 462 m² | Parking row, courtyard |
| 30m | 34.6m | 1039 m² | Parking lot, yard |
| 50m | 57.7m | 2887 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 5.0MP (2592×1944) resolution at 60° field of view. Effective identification range up to 25m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 25m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the Wisenet QNO-8030R
Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.
Plan storage at roughly 20 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.
Coverage geometry & DORI distances
At a 5-metre standoff the Wisenet Wisenet QNO-8030R covers about 5.8 m of scene width; at 10 m that grows to 11.5 m, and at 20 m to 23.1 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 103 m, observe up to 41 m, recognise up to 21 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 10 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 6mm lens declared by the manufacturer.
Power & cabling
The Wisenet Wisenet QNO-8030R draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Wisenet Wisenet QNO-8030R suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Wisenet range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the Wisenet Wisenet QNO-8030R?
The camera draws roughly 7.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Wisenet Wisenet QNO-8030R consume per day?
At 5.0MP (2592×1944) resolution, 15 fps H.265 continuous recording, the Wisenet QNO-8030R produces approximately 20 GB per day — about 600 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Wisenet Wisenet QNO-8030R identify a person?
Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 10 m, recognises a person up to 21 m, observes general activity up to 41 m, and detects motion up to 103 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Wisenet Wisenet QNO-8030R use?
Typical ingest is 8 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Wisenet Bullet Cameras
Other Wisenet cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online — no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Wisenet Wisenet QNO-8030R
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install