CCTVPLANNER.IO · CAMERA · VERKADA

    Verkada CB53-TE

    Bullet Camera with 5.2MP (2688×1944) resolution, 37° field of view, and 100m IR night vision range. Features Super Low Light technology for superior night performance.

    NO.01
    5.2MP
    Resolution
    NO.02
    37°
    Horizontal FOV
    NO.03
    36m
    Effective Range
    NO.04
    100m
    IR Range

    SPECIFICATIONS · CB53-TE

    Specifications

    Resolution5.2MP (2688×1944)
    Focal Length8-20mm
    Horizontal FOV37°
    Effective Range36m
    IR Range100m
    TypeBullet Camera
    Low LightYes — Super Low Light

    About the Verkada CB53-TE

    The Verkada CB53-TE is a weather-sealed bullet housing optimized for perimeter, parking, and exterior building installations. 5MP resolution sharpens the image well past 1080p — facial identification extends to roughly 20 meters and retroactive digital zoom on recorded footage stays crisp, without the storage and bandwidth cost of a full 4K stream. An IR reach above 80 m is unusual for the format and is intended for highway monitoring, large industrial sites, and airport perimeters where conventional cameras would simply lose the target after dark. A narrow field of view trades coverage area for pixel density at distance — the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations. Super Low Light technology pulls usable color out of scenes lit by little more than a streetlight or moonlight, eliminating the need to drop into B/W mode in most night conditions.

    Best use cases for this camera

    Outdoor perimeter & fenceline

    With 100m IR reach and 5.2MP (2688×1944) resolution, this camera covers fences, yards, and approach roads in complete darkness. Mount on poles or eaves at 4–6 m height angled slightly downward.

    Entrance, lobby & vestibule

    Low-light sensitivity preserves face detail even when interior lighting is dimmed for energy savings. Useful for capturing visitors as they enter and leave.

    Long corridor & aisle monitoring

    The 37° narrow angle is intentionally tuned for corridor work — it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.

    License plate / ANPR

    The combination of 37° narrow angle and 5.2MP (2688×1944) resolution provides the pixel density required for ANPR at typical lane widths, especially when paired with proper lane lighting and perpendicular mounting.

    Strengths

    • 5.2MP sensor preserves detail under digital zoom on recorded footage
    • 100m IR range eliminates the need for external night-time illuminators
    • Super Low Light sensor maintains color detail in near-darkness
    • 36m effective range supports outdoor perimeter and parking-lot deployments

    Considerations

    • Narrow angle requires more cameras to cover wide areas — plan camera count accordingly

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m3.3m17Entrance, corridor
    10m6.7m67Room, retail aisle
    15m10.0m151Warehouse, parking row
    20m13.4m268Parking row, courtyard
    30m20.1m602Parking lot, yard
    50m33.5m1673Perimeter, large area

    Field of View Visualization

    Camera36m37° FOVEffective rangeIR range (100m)

    Night Vision Performance

    Daytime

    Full 5.2MP (2688×1944) resolution at 37° field of view. Effective identification range up to 100m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 100m in complete darkness. Super Low Light sensor captures colour images in near-darkness.

    Installation tips for the CB53-TE

    1

    Mount at 4–6 m height angled 10–20° downward — high enough to deter tampering, low enough to preserve face detail at 25m.

    2

    Avoid mounting under direct ceiling lights or behind glass — both reflect IR back into the lens and create severe glare in the image.

    3

    Plan cabling for multiple cameras to cover wide areas — at 37° you cover roughly 7 m of width per camera at 10 m distance.

    4

    Plan storage at roughly 21 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Verkada CB53-TE covers about 3.3 m of scene width; at 10 m that grows to 6.7 m, and at 20 m to 13.4 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 182 m, observe up to 73 m, recognise up to 36 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 18 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 8-20mm lens declared by the manufacturer.

    Detect
    182 m
    Observe
    73 m
    Recognise
    36 m
    Identify
    18 m

    Power & cabling

    The Verkada CB53-TE draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Verkada CB53-TE suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Verkada range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the Verkada CB53-TE?

    The camera draws roughly 12.0 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the Verkada CB53-TE consume per day?

    At 5.2MP (2688×1944) resolution, 15 fps H.265 continuous recording, the CB53-TE produces approximately 21 GB per day — about 630 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the Verkada CB53-TE identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 18 m, recognises a person up to 36 m, observes general activity up to 73 m, and detects motion up to 182 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does Verkada CB53-TE use?

    Typical ingest is 8 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related Verkada Bullet Cameras

    Other Verkada cameras

    Helpful Tools & Resources

    Plan your layout with Verkada CB53-TE

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install