CCTVPLANNER.IO · CAMERA · TP-LINK VIGI
TP-Link VIGI VIGI C330I(4mm)
Bullet Camera with 3.0MP (2304×1296) resolution, 79° field of view, and 30m IR night vision range.
SPECIFICATIONS · VIGI C330I(4MM)
Specifications
About the TP-Link VIGI VIGI C330I(4mm)
The TP-Link VIGI VIGI C330I(4mm) is a long-distance bullet body that mounts cleanly under eaves, on poles, or along fencelines. 4MP sits in the sweet spot for installations where storage is a concern but you still want crisper retroactive zooming during incident review. Medium IR range (20–40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A standard 50–80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.
Best use cases for this camera
Parking lot & open yard
The 79° field of view spans roughly 66 meters at the camera's effective range — wide enough to monitor multiple parking rows from a single mounting point.
Strengths
- •40m effective range supports outdoor perimeter and parking-lot deployments
Considerations
- •No notable limitations for the intended class of installations
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 8.2m | 41 m² | Entrance, corridor |
| 10m | 16.5m | 165 m² | Room, retail aisle |
| 15m | 24.7m | 371 m² | Warehouse, parking row |
| 20m | 33.0m | 659 m² | Parking row, courtyard |
| 30m | 49.5m | 1484 m² | Parking lot, yard |
| 50m | 82.4m | 4122 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 3.0MP (2304×1296) resolution at 79° field of view. Effective identification range up to 40m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 30m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the VIGI C330I(4mm)
Mount at 4–6 m height angled 10–20° downward — high enough to deter tampering, low enough to preserve face detail at 28m.
Coverage geometry & DORI distances
At a 5-metre standoff the TP-Link VIGI VIGI C330I(4mm) covers about 8.2 m of scene width; at 10 m that grows to 16.5 m, and at 20 m to 33.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 56 m, observe up to 22 m, recognise up to 11 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 6 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 4mm lens declared by the manufacturer.
Power & cabling
The TP-Link VIGI VIGI C330I(4mm) draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the TP-Link VIGI VIGI C330I(4mm) suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the TP-Link VIGI range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the TP-Link VIGI VIGI C330I(4mm)?
The camera draws roughly 7.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the TP-Link VIGI VIGI C330I(4mm) consume per day?
At 3.0MP (2304×1296) resolution, 15 fps H.265 continuous recording, the VIGI C330I(4mm) produces approximately 12 GB per day — about 360 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the TP-Link VIGI VIGI C330I(4mm) identify a person?
Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 6 m, recognises a person up to 11 m, observes general activity up to 22 m, and detects motion up to 56 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does TP-Link VIGI VIGI C330I(4mm) use?
Typical ingest is 5 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related TP-Link VIGI Bullet Cameras
Other TP-Link VIGI cameras
Helpful Tools & Resources
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with TP-Link VIGI VIGI C330I(4mm)
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install