CCTVPLANNER.IO · CAMERA · SWANN

    Swann Swann NHD-1200FB-US

    Bullet Camera with 12.0MP (4000×3000) resolution, 90° field of view, and 50m IR night vision range. Features Super Low Light technology for superior night performance.

    NO.01
    12MP
    Resolution
    NO.02
    90°
    Horizontal FOV
    NO.03
    18m
    Effective Range
    NO.04
    50m
    IR Range

    SPECIFICATIONS · SWANN NHD-1200FB-US

    Specifications

    Resolution12.0MP (4000×3000)
    Focal Length4.5mm
    Horizontal FOV90°
    Effective Range18m
    IR Range50m
    TypeBullet Camera
    Low LightYes — Super Low Light

    About the Swann Swann NHD-1200FB-US

    The Swann Swann NHD-1200FB-US is a weather-sealed bullet housing optimized for perimeter, parking, and exterior building installations. Ultra-high resolution above 8MP is reserved for situations where one camera must replace several — large open atriums, parking decks, and stadium seating areas where digital zoom on a single feed substitutes for multiple cameras. A 50–80 m IR range turns this into a true night-perimeter camera — open yards, fenced lots, and rural properties become practical use cases without supplemental lighting. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots. The Super Low Light sensor is the feature most installers care about for residential and parking-lot use — it preserves identification detail when older cameras lose all color and most contour.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 90° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Strengths

    • 12MP sensor preserves detail under digital zoom on recorded footage
    • 50m IR range eliminates the need for external night-time illuminators
    • Super Low Light sensor maintains color detail in near-darkness
    • 90° wide field of view reduces the number of cameras needed per area

    Considerations

    • Higher resolution increases storage and bandwidth requirements proportionally — verify NVR capacity

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m10.0m50Entrance, corridor
    10m20.0m200Room, retail aisle
    15m30.0m450Warehouse, parking row
    20m40.0m800Parking row, courtyard
    30m60.0m1800Parking lot, yard
    50m100.0m5000Perimeter, large area

    Field of View Visualization

    Camera18m90° FOVEffective rangeIR range (50m)

    Night Vision Performance

    Daytime

    Full 12.0MP (4000×3000) resolution at 90° field of view. Effective identification range up to 50m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 50m in complete darkness. Super Low Light sensor captures colour images in near-darkness.

    Installation tips for the Swann NHD-1200FB-US

    1

    Avoid mounting under direct ceiling lights or behind glass — both reflect IR back into the lens and create severe glare in the image.

    2

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.

    3

    Plan storage at roughly 48 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Swann Swann NHD-1200FB-US covers about 10.0 m of scene width; at 10 m that grows to 20.0 m, and at 20 m to 40.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 92 m, observe up to 37 m, recognise up to 18 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 9 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 4.5mm lens declared by the manufacturer.

    Detect
    92 m
    Observe
    37 m
    Recognise
    18 m
    Identify
    9 m

    Power & cabling

    The Swann Swann NHD-1200FB-US draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Swann Swann NHD-1200FB-US suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Swann range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the Swann Swann NHD-1200FB-US?

    The camera draws roughly 12.0 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the Swann Swann NHD-1200FB-US consume per day?

    At 12.0MP (4000×3000) resolution, 15 fps H.265 continuous recording, the Swann NHD-1200FB-US produces approximately 48 GB per day — about 1440 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the Swann Swann NHD-1200FB-US identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 9 m, recognises a person up to 18 m, observes general activity up to 37 m, and detects motion up to 92 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does Swann Swann NHD-1200FB-US use?

    Typical ingest is 18 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related Swann Bullet Cameras

    Other Swann cameras

    Helpful Tools & Resources

    Plan your layout with Swann Swann NHD-1200FB-US

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install