CCTVPLANNER.IO · CAMERA · REOLINK
Reolink Go PT
PTZ Camera with 2.1MP (1920×1080) resolution, 60° field of view, and 10m IR night vision range.
SPECIFICATIONS · GO PT
Specifications
About the Reolink Go PT
The Reolink Go PT is a motorized PTZ chassis ideal for large open spaces — parking lots, stadiums, airports, and city surveillance. 1080p Full HD remains the most widely deployed CCTV resolution in 2026 — it balances bandwidth, storage, and detail well, supporting facial identification up to roughly 12 meters in good light. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. A standard 50–80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.
Best use cases for this camera
Large area patrol & target tracking
PTZ control enables operator-initiated tracking of suspicious activity, scheduled tours of preset positions overnight, and forensic zoom into recorded footage. Best paired with a wide-angle "overview" camera that triggers the PTZ via analytics.
Strengths
- •PTZ control enables operator-driven tracking and pre-set tours
Considerations
- •Short IR range limits night usability to indoor or close-proximity scenarios
- •PTZ cameras only see one direction at a time — pair with a fixed overview camera to avoid blind spots
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 5.8m | 29 m² | Entrance, corridor |
| 10m | 11.5m | 115 m² | Room, retail aisle |
| 15m | 17.3m | 260 m² | Warehouse, parking row |
| 20m | 23.1m | 462 m² | Parking row, courtyard |
| 30m | 34.6m | 1039 m² | Parking lot, yard |
| 50m | 57.7m | 2887 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 2.1MP (1920×1080) resolution at 60° field of view. Effective identification range up to 20m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 10m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the Go PT
Mount above 4 m on a rigid pole or wall bracket — PTZ vibrations are amplified at low mounting heights and degrade image quality during pan operations.
Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.
Coverage geometry & DORI distances
At a 5-metre standoff the Reolink Go PT covers about 5.8 m of scene width; at 10 m that grows to 11.5 m, and at 20 m to 23.1 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 67 m, observe up to 27 m, recognise up to 13 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 7 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the fixed lens declared by the manufacturer.
Power & cabling
The Reolink Go PT draws an estimated 30.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3at (Class 4, ≤30 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. The Reolink Go PT's PTZ pan range can sweep into neighbouring properties or public roads; document allowed pan limits in the installation record and configure privacy masks (see Reolink's web-UI under "Privacy Mask") for any window or doorway you cannot legally surveil.
Installer time & cost (rough estimate)
A typical EU installer quotes 5–6 h of labour per ptz camera of this class (approximately €225–€275 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Reolink Go PT suitable for outdoor installation?
Reolink PTZ models are generally designed for outdoor use with IP66 ingress rating and -30°C to +60°C operating range. Mount on a rigid pole at ≥ 4 m to dampen wind-driven vibration that would degrade the live image during pan operations.
What PoE class powers the Reolink Go PT?
The camera draws roughly 30.0 W in steady-state operation, requiring a 802.3at (Class 4, ≤30 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Reolink Go PT consume per day?
At 2.1MP (1920×1080) resolution, 15 fps H.265 continuous recording, the Go PT produces approximately 8 GB per day — about 240 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Reolink Go PT identify a person?
Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 7 m, recognises a person up to 13 m, observes general activity up to 27 m, and detects motion up to 67 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Reolink Go PT use?
Typical ingest is 3 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Reolink PTZ Cameras
Other Reolink cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online — no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Reolink Go PT
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install