Mobotix M15 AllroundDual Mx-M15A-D6N041

SPECIFICATIONS · M15 ALLROUNDDUAL MX-M15A-D6N041

About the Mobotix M15 AllroundDual Mx-M15A-D6N041

The Mobotix M15 AllroundDual Mx-M15A-D6N041 is a weather-sealed bullet housing optimized for perimeter, parking, and exterior building installations. At 5-to-6MP the sensor sits between 1080p economy and 4K forensic detail: enough pixels-per-metre for evidence-grade faces at typical entrance and driveway distances, while keeping recording bitrate materially lighter than an 8MP camera. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A standard 50–80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.

Best use cases for this camera

Coverage at Different Distances

Field of View Visualization

Night Vision Performance

Installation tips for the M15 AllroundDual Mx-M15A-D6N041

Coverage geometry & DORI distances

At a 5-metre standoff the Mobotix M15 AllroundDual Mx-M15A-D6N041 covers about 8.2 m of scene width; at 10 m that grows to 16.5 m, and at 20 m to 33.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 72 m, observe up to 29 m, recognise up to 14 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 7 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 4.1mm lens declared by the manufacturer.

Power & cabling

The Mobotix M15 AllroundDual Mx-M15A-D6N041 draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

Privacy & legal (GDPR / RODO)

Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

Installer time & cost (rough estimate)

A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

Frequently asked questions

Related Mobotix Bullet Cameras

Other Mobotix cameras

Helpful Tools & Resources