What is the field of view of Milesight TS5510-GVH?

The Milesight TS5510-GVH has a horizontal field of view of 41.4° with a 15-50mm lens. At 10 meters distance, it covers approximately 7.6 meters width.

What is the IR range of Milesight TS5510-GVH?

The Milesight TS5510-GVH features 60m infrared illumination range for night vision, making it suitable for long-range outdoor surveillance.

How far can Milesight TS5510-GVH see clearly?

The recommended effective range of Milesight TS5510-GVH is approximately 32 meters (DORI Recognize threshold, ≥125 px/m on the target). At this distance the 5.1MP (2464×2056) sensor provides enough pixel density to describe a person's actions and clothing; identify-grade detail requires roughly half this distance.

CCTVPLANNER.IO · CAMERA · MILESIGHT

Milesight TS5510-GVH

Bullet Camera with 5.1MP (2464×2056) resolution, 41.4° field of view, and 60m IR night vision range.

Speed enforcement is the job of the TS5510-GVH, a DualVision TrafficX unit that fuses two 5MP global-shutter sensors with an integrated 24 GHz radar accurate to 2 km/h across 32 simultaneous targets. It reads plates to 50 m at speeds up to 320 km/h over two to three lanes, and a 60 m IR strobe keeps night captures usable. Built-in GPS and optional 4G suit standalone roadside poles.

NO.01

5.1MP

Resolution

NO.02

41.4°

Horizontal FOV

NO.03

32m

Effective Range

NO.04

60m

IR Range

SPECIFICATIONS · TS5510-GVH

Specifications

Resolution5.1MP (2464×2056)

Focal Length15-50mm

Horizontal FOV41.4°

Effective Range32m

IR Range60m

TypeBullet Camera

Low LightStandard

About the Milesight TS5510-GVH

The Milesight TS5510-GVH is a weather-sealed bullet housing optimized for perimeter, parking, and exterior building installations. At 5-to-6MP the sensor sits between 1080p economy and 4K forensic detail: enough pixels-per-metre for evidence-grade faces at typical entrance and driveway distances, while keeping recording bitrate materially lighter than an 8MP camera. A 50–80 m IR range turns this into a true night-perimeter camera — open yards, fenced lots, and rural properties become practical use cases without supplemental lighting. A narrow field of view trades coverage area for pixel density at distance — the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations.

Best use cases for this camera

Outdoor perimeter & fenceline

With 60m IR reach and 5.1MP (2464×2056) resolution, this camera covers fences, yards, and approach roads in complete darkness. Mount on poles or eaves at 4–6 m height angled slightly downward.

Long corridor & aisle monitoring

The 41.4° narrow angle is intentionally tuned for corridor work — it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.

License plate / ANPR

The combination of 41.4° narrow angle and 5.1MP (2464×2056) resolution provides the pixel density required for ANPR at typical lane widths, especially when paired with proper lane lighting and perpendicular mounting.

Strengths

•5.1MP sensor preserves detail under digital zoom on recorded footage
•60m IR range eliminates the need for external night-time illuminators
•32m effective range supports outdoor perimeter and parking-lot deployments

Considerations

•Narrow angle requires more cameras to cover wide areas — plan camera count accordingly

Coverage at Different Distances

Distance	Coverage Width	Coverage Area	Use Case
5m	3.8m	19 m²	Entrance, corridor
10m	7.6m	76 m²	Room, retail aisle
15m	11.3m	170 m²	Warehouse, parking row
20m	15.1m	302 m²	Parking row, courtyard
30m	22.7m	680 m²	Parking lot, yard
50m	37.8m	1889 m²	Perimeter, large area

Field of View Visualization

Night Vision Performance

Daytime

Full 5.1MP (2464×2056) resolution at 41.4° field of view. Effective identification range up to 60m in good lighting conditions.

Nighttime (IR)

Built-in IR LEDs illuminate up to 60m in complete darkness. Switches to B/W mode for clear night footage.

Installation tips for the TS5510-GVH

Mount at 4–6 m height angled 10–20° downward — high enough to deter tampering, low enough to preserve face detail at 22m.

Avoid mounting under direct ceiling lights or behind glass — both reflect IR back into the lens and create severe glare in the image.

Plan cabling for multiple cameras to cover wide areas — at 41.4° you cover roughly 8 m of width per camera at 10 m distance.

Plan storage at roughly 20 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.

Coverage geometry & DORI distances

At a 5-metre standoff the Milesight TS5510-GVH covers about 3.8 m of scene width; at 10 m that grows to 7.6 m, and at 20 m to 15.1 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 159 m, observe up to 64 m, recognise up to 32 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 16 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 15-50mm lens declared by the manufacturer.

Detect

159 m

Observe

64 m

Recognise

32 m

Identify

16 m

Power & cabling

The Milesight TS5510-GVH draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

Privacy & legal (GDPR / RODO)

Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

Installer time & cost (rough estimate)

A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

Frequently asked questions

Is the Milesight TS5510-GVH suitable for outdoor installation?

Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Milesight range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

What PoE class powers the Milesight TS5510-GVH?

The camera draws roughly 12.0 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

How much storage does the Milesight TS5510-GVH consume per day?

At 5.1MP (2464×2056) resolution, 15 fps H.265 continuous recording, the TS5510-GVH produces approximately 20 GB per day — about 600 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

Up to what distance can the Milesight TS5510-GVH identify a person?

Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 16 m, recognises a person up to 32 m, observes general activity up to 64 m, and detects motion up to 159 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

What network bandwidth does Milesight TS5510-GVH use?

Typical ingest is 8 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.