CCTVPLANNER.IO · CAMERA · MERIT LILIN
Merit Lilin Z7R8082EX30
Bullet Camera with 8.3MP (3840×2160) resolution, 59.8° field of view, and 80m IR night vision range.
SPECIFICATIONS · Z7R8082EX30
Specifications
About the Merit Lilin Z7R8082EX30
The Merit Lilin Z7R8082EX30 is a long-distance bullet body that mounts cleanly under eaves, on poles, or along fencelines. 4K (8MP) resolution roughly quadruples 1080p pixel density, pushing usable identification distance past 25 meters and giving forensic-grade digital zoom on archived footage. With long-range IR you can rely on the camera as the only night-vision source over a wide area, eliminating the cost and visual clutter of dedicated IR floods. A standard 50–80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion.
Best use cases for this camera
Outdoor perimeter & fenceline
With 80m IR reach and 8.3MP (3840×2160) resolution, this camera covers fences, yards, and approach roads in complete darkness. Mount on poles or eaves at 4–6 m height angled slightly downward.
Strengths
- •8.3MP sensor preserves detail under digital zoom on recorded footage
- •80m IR range eliminates the need for external night-time illuminators
Considerations
- •Higher resolution increases storage and bandwidth requirements proportionally — verify NVR capacity
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 5.8m | 29 m² | Entrance, corridor |
| 10m | 11.5m | 115 m² | Room, retail aisle |
| 15m | 17.3m | 259 m² | Warehouse, parking row |
| 20m | 23.0m | 460 m² | Parking row, courtyard |
| 30m | 34.5m | 1035 m² | Parking lot, yard |
| 50m | 57.5m | 2875 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 8.3MP (3840×2160) resolution at 59.8° field of view. Effective identification range up to 80m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 80m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the Z7R8082EX30
Avoid mounting under direct ceiling lights or behind glass — both reflect IR back into the lens and create severe glare in the image.
Plan storage at roughly 33 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.
Coverage geometry & DORI distances
At a 5-metre standoff the Merit Lilin Z7R8082EX30 covers about 5.8 m of scene width; at 10 m that grows to 11.5 m, and at 20 m to 23.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 134 m, observe up to 53 m, recognise up to 27 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 13 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 4.94-148.2mm lens declared by the manufacturer.
Power & cabling
The Merit Lilin Z7R8082EX30 draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Merit Lilin Z7R8082EX30 suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Merit Lilin range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the Merit Lilin Z7R8082EX30?
The camera draws roughly 12.0 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Merit Lilin Z7R8082EX30 consume per day?
At 8.3MP (3840×2160) resolution, 15 fps H.265 continuous recording, the Z7R8082EX30 produces approximately 33 GB per day — about 990 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Merit Lilin Z7R8082EX30 identify a person?
Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 13 m, recognises a person up to 27 m, observes general activity up to 53 m, and detects motion up to 134 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Merit Lilin Z7R8082EX30 use?
Typical ingest is 12 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Merit Lilin Bullet Cameras
Other Merit Lilin cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online — no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Merit Lilin Z7R8082EX30
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install