CCTVPLANNER.IO · CAMERA · LTS
LTS CMIP9342W-M
Bullet Camera with 3.7MP (2560×1440) resolution, 84° field of view, and 30m IR night vision range.
SPECIFICATIONS · CMIP9342W-M
Specifications
About the LTS CMIP9342W-M
The LTS CMIP9342W-M is a rugged outdoor-grade bullet form factor designed to withstand exposure to weather, vandalism, and direct sunlight. 4MP resolution delivers a noticeable detail upgrade over 1080p — facial identification extends to roughly 18 meters, and digital zoom on recorded footage stays usable. Medium IR range (20–40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.
Best use cases for this camera
Entrance, lobby & vestibule
The 84° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.
Strengths
Considerations
- •No notable limitations for the intended class of installations
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 9.0m | 45 m² | Entrance, corridor |
| 10m | 18.0m | 180 m² | Room, retail aisle |
| 15m | 27.0m | 405 m² | Warehouse, parking row |
| 20m | 36.0m | 720 m² | Parking row, courtyard |
| 30m | 54.0m | 1621 m² | Parking lot, yard |
| 50m | 90.0m | 4502 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 3.7MP (2560×1440) resolution at 84° field of view. Effective identification range up to 25m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 30m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the CMIP9342W-M
Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.
Coverage geometry & DORI distances
At a 5-metre standoff the LTS CMIP9342W-M covers about 9.0 m of scene width; at 10 m that grows to 18.0 m, and at 20 m to 36.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 57 m, observe up to 23 m, recognise up to 11 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 6 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 4mm lens declared by the manufacturer.
Power & cabling
The LTS CMIP9342W-M draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the LTS CMIP9342W-M suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the LTS range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the LTS CMIP9342W-M?
The camera draws roughly 7.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the LTS CMIP9342W-M consume per day?
At 3.7MP (2560×1440) resolution, 15 fps H.265 continuous recording, the CMIP9342W-M produces approximately 15 GB per day — about 450 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the LTS CMIP9342W-M identify a person?
Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 6 m, recognises a person up to 11 m, observes general activity up to 23 m, and detects motion up to 57 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does LTS CMIP9342W-M use?
Typical ingest is 6 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related LTS Bullet Cameras
Other LTS cameras
Helpful Tools & Resources
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with LTS CMIP9342W-M
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install