Lorex Lorex Classic 4K+ PoE AI Turret Camera with Person & Vehicle Detection

SPECIFICATIONS · LOREX CLASSIC 4K+ POE AI TURRET CAMERA WITH PERSON & VEHICLE DETECTION

About the Lorex Lorex Classic 4K+ PoE AI Turret Camera with Person & Vehicle Detection

The Lorex Lorex Classic 4K+ PoE AI Turret Camera with Person & Vehicle Detection is a long-distance bullet body that mounts cleanly under eaves, on poles, or along fencelines. Sub-megapixel resolution is suitable only for general overview footage — useful for movement detection but insufficient for facial recognition or license-plate reading. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots. The Super Low Light sensor is the feature most installers care about for residential and parking-lot use — it preserves identification detail when older cameras lose all color and most contour.

Best use cases for this camera

Coverage at Different Distances

Field of View Visualization

Night Vision Performance

Installation tips for the Lorex Classic 4K+ PoE AI Turret Camera with Person & Vehicle Detection

Coverage geometry & DORI distances

At a 5-metre standoff the Lorex Lorex Classic 4K+ PoE AI Turret Camera with Person & Vehicle Detection covers about 10.0 m of scene width; at 10 m that grows to 20.0 m, and at 20 m to 40.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 38 m, observe up to 15 m, recognise up to 8 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 4 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the fixed lens declared by the manufacturer.

Power & cabling

The Lorex Lorex Classic 4K+ PoE AI Turret Camera with Person & Vehicle Detection draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

Privacy & legal (GDPR / RODO)

Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. With 90° horizontal FOV and 30 m effective range, a single turret camera unit covers a large swath of scene — confirm during commissioning that no part of the visible area extends beyond the property boundary, and add a privacy mask if it does.

Installer time & cost (rough estimate)

A typical EU installer quotes 3–4 h of labour per turret camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

Frequently asked questions

Related Lorex Turret Cameras

Other Lorex cameras

Helpful Tools & Resources