CCTVPLANNER.IO · CAMERA · INDIGOVISION

    IndigoVision BX-5MP-DO-S-IR

    Dome Camera with 5.0MP (2592×1944) resolution, 90° field of view, and 20m IR night vision range.

    NO.01
    5MP
    Resolution
    NO.02
    90°
    Horizontal FOV
    NO.03
    12m
    Effective Range
    NO.04
    20m
    IR Range

    SPECIFICATIONS · BX-5MP-DO-S-IR

    Specifications

    Resolution5.0MP (2592×1944)
    Focal Length3.1-8.4mm
    Horizontal FOV90°
    Effective Range12m
    IR Range20m
    TypeDome Camera
    Low LightStandard

    About the IndigoVision BX-5MP-DO-S-IR

    The IndigoVision BX-5MP-DO-S-IR is a discreet dome housing well-suited to indoor retail, office, lobby, and educational environments where aesthetics matter. 4K (8MP) resolution roughly quadruples 1080p pixel density, pushing usable identification distance past 25 meters and giving forensic-grade digital zoom on archived footage. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 90° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Retail & office interior

    Dome form factor and 5.0MP (2592×1944) resolution make this a clean retail/office choice — the housing blends into ceilings and the sensor delivers enough detail for POS-area monitoring and incident review.

    Strengths

    • 5MP sensor preserves detail under digital zoom on recorded footage
    • 90° wide field of view reduces the number of cameras needed per area
    • Vandal-resistant dome housing harder to tamper with than bullet form factor

    Considerations

    • Short IR range limits night usability to indoor or close-proximity scenarios

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m10.0m50Entrance, corridor
    10m20.0m200Room, retail aisle
    15m30.0m450Warehouse, parking row
    20m40.0m800Parking row, courtyard
    30m60.0m1800Parking lot, yard
    50m100.0m5000Perimeter, large area

    Field of View Visualization

    Camera12m90° FOVEffective rangeIR range (20m)

    Night Vision Performance

    Daytime

    Full 5.0MP (2592×1944) resolution at 90° field of view. Effective identification range up to 20m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 20m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the BX-5MP-DO-S-IR

    1

    Ceiling-mount at 2.5–3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.

    2

    Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.

    3

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.

    4

    Plan storage at roughly 20 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.

    Coverage geometry & DORI distances

    At a 5-metre standoff the IndigoVision BX-5MP-DO-S-IR covers about 10.0 m of scene width; at 10 m that grows to 20.0 m, and at 20 m to 40.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 60 m, observe up to 24 m, recognise up to 12 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 6 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 3.1-8.4mm lens declared by the manufacturer.

    Detect
    60 m
    Observe
    24 m
    Recognise
    12 m
    Identify
    6 m

    Power & cabling

    The IndigoVision BX-5MP-DO-S-IR draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the IndigoVision BX-5MP-DO-S-IR suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the IndigoVision range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the IndigoVision BX-5MP-DO-S-IR?

    The camera draws roughly 7.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the IndigoVision BX-5MP-DO-S-IR consume per day?

    At 5.0MP (2592×1944) resolution, 15 fps H.265 continuous recording, the BX-5MP-DO-S-IR produces approximately 20 GB per day — about 600 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the IndigoVision BX-5MP-DO-S-IR identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 6 m, recognises a person up to 12 m, observes general activity up to 24 m, and detects motion up to 60 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does IndigoVision BX-5MP-DO-S-IR use?

    Typical ingest is 8 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related IndigoVision Dome Cameras

    Other IndigoVision cameras

    Helpful Tools & Resources

    Plan your layout with IndigoVision BX-5MP-DO-S-IR

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install