Imou Imou Bullet 2 2MP 2.8mm (IPC-F22FEP)

SPECIFICATIONS · IMOU BULLET 2 2MP 2.8MM (IPC-F22FEP)

Specifications

About the Imou Imou Bullet 2 2MP 2.8mm (IPC-F22FEP)

The Imou Imou Bullet 2 2MP 2.8mm (IPC-F22FEP) is a rugged outdoor-grade bullet form factor designed to withstand exposure to weather, vandalism, and direct sunlight. 1080p Full HD remains the most widely deployed CCTV resolution in 2026 — it balances bandwidth, storage, and detail well, supporting facial identification up to roughly 12 meters in good light. Medium IR range (20–40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots. Super Low Light technology pulls usable color out of scenes lit by little more than a streetlight or moonlight, eliminating the need to drop into B/W mode in most night conditions.

Best use cases for this camera

Coverage at Different Distances

Field of View Visualization

Night Vision Performance

Installation tips for the Imou Bullet 2 2MP 2.8mm (IPC-F22FEP)

Coverage geometry & DORI distances

At a 5-metre standoff the Imou Imou Bullet 2 2MP 2.8mm (IPC-F22FEP) covers about 13.8 m of scene width; at 10 m that grows to 27.5 m, and at 20 m to 55.1 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 28 m, observe up to 11 m, recognise up to 6 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 3 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 2.8mm lens declared by the manufacturer.

Power & cabling

The Imou Imou Bullet 2 2MP 2.8mm (IPC-F22FEP) draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

Privacy & legal (GDPR / RODO)

Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. With 108° horizontal FOV and 30 m effective range, a single bullet camera unit covers a large swath of scene — confirm during commissioning that no part of the visible area extends beyond the property boundary, and add a privacy mask if it does.

Installer time & cost (rough estimate)

A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

Frequently asked questions

Related Imou Bullet Cameras

Other Imou cameras

Helpful Tools & Resources