CCTVPLANNER.IO · CAMERA · IDIS
IDIS DC-D4548WRA
Dome Camera with 5.0MP (2592×1944) resolution, 37° field of view, and 40m IR night vision range.
SPECIFICATIONS · DC-D4548WRA
Specifications
About the IDIS DC-D4548WRA
The IDIS DC-D4548WRA is a tinted-bubble dome that obscures the lens direction, deterring tampering and vandalism. At 5-to-6MP the sensor sits between 1080p economy and 4K forensic detail: enough pixels-per-metre for evidence-grade faces at typical entrance and driveway distances, while keeping recording bitrate materially lighter than an 8MP camera. Medium IR range (20–40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A narrow field of view trades coverage area for pixel density at distance — the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations.
Best use cases for this camera
Long corridor & aisle monitoring
The 37° narrow angle is intentionally tuned for corridor work — it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.
Retail & office interior
Dome form factor and 5.0MP (2592×1944) resolution make this a clean retail/office choice — the housing blends into ceilings and the sensor delivers enough detail for POS-area monitoring and incident review.
License plate / ANPR
The combination of 37° narrow angle and 5.0MP (2592×1944) resolution provides the pixel density required for ANPR at typical lane widths, especially when paired with proper lane lighting and perpendicular mounting.
Strengths
- •5MP sensor preserves detail under digital zoom on recorded footage
- •Vandal-resistant dome housing harder to tamper with than bullet form factor
- •36m effective range supports outdoor perimeter and parking-lot deployments
Considerations
- •Narrow angle requires more cameras to cover wide areas — plan camera count accordingly
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 3.3m | 17 m² | Entrance, corridor |
| 10m | 6.7m | 67 m² | Room, retail aisle |
| 15m | 10.0m | 151 m² | Warehouse, parking row |
| 20m | 13.4m | 268 m² | Parking row, courtyard |
| 30m | 20.1m | 602 m² | Parking lot, yard |
| 50m | 33.5m | 1673 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 5.0MP (2592×1944) resolution at 37° field of view. Effective identification range up to 40m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 40m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the DC-D4548WRA
Ceiling-mount at 2.5–3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.
Plan cabling for multiple cameras to cover wide areas — at 37° you cover roughly 7 m of width per camera at 10 m distance.
Plan storage at roughly 20 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.
Coverage geometry & DORI distances
At a 5-metre standoff the IDIS DC-D4548WRA covers about 3.3 m of scene width; at 10 m that grows to 6.7 m, and at 20 m to 13.4 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 178 m, observe up to 71 m, recognise up to 36 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 18 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 22mm lens declared by the manufacturer.
Power & cabling
The IDIS DC-D4548WRA draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the IDIS DC-D4548WRA suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the IDIS range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the IDIS DC-D4548WRA?
The camera draws roughly 7.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the IDIS DC-D4548WRA consume per day?
At 5.0MP (2592×1944) resolution, 15 fps H.265 continuous recording, the DC-D4548WRA produces approximately 20 GB per day — about 600 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the IDIS DC-D4548WRA identify a person?
Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 18 m, recognises a person up to 36 m, observes general activity up to 71 m, and detects motion up to 178 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does IDIS DC-D4548WRA use?
Typical ingest is 8 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related IDIS Dome Cameras
Other IDIS cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online — no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with IDIS DC-D4548WRA
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install