CCTVPLANNER.IO · CAMERA · I-PRO

    i-PRO WV-X86531-Z2

    Panoramic Camera with 7.1MP (3072×2304) resolution, 97° field of view, and 0m IR night vision range.

    NO.01
    7.1MP
    Resolution
    NO.02
    97°
    Horizontal FOV
    NO.03
    13m
    Effective Range
    NO.04
    0m
    IR Range

    SPECIFICATIONS · WV-X86531-Z2

    Specifications

    Resolution7.1MP (3072×2304)
    Focal Lengthfixed wide + 4.0-84.6mm PTZ
    Horizontal FOV97°
    Effective Range13m
    IR Range0m
    TypePanoramic Camera
    Low LightStandard

    About the i-PRO WV-X86531-Z2

    The i-PRO WV-X86531-Z2 is a fisheye/panoramic optic that captures a complete 180° or 360° scene from a single ceiling or wall position. 4K (8MP) resolution roughly quadruples 1080p pixel density, pushing usable identification distance past 25 meters and giving forensic-grade digital zoom on archived footage. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 97° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Single-camera room coverage

    A single panoramic camera replaces 3–4 conventional cameras when ceiling-mounted in the center of an open space. Ideal for retail floors, classrooms, and small warehouses where simplification of cabling and licensing matters.

    Strengths

    • 7.1MP sensor preserves detail under digital zoom on recorded footage
    • 97° wide field of view reduces the number of cameras needed per area
    • Single-camera coverage of full rooms reduces cabling and licensing cost

    Considerations

    • No built-in IR — requires external illumination for night use
    • Fisheye distortion requires dewarping in software for natural viewing angles

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m11.3m57Entrance, corridor
    10m22.6m226Room, retail aisle
    15m33.9m509Warehouse, parking row
    20m45.2m904Parking row, courtyard
    30m67.8m2035Parking lot, yard
    50m113.0m5651Perimeter, large area

    Field of View Visualization

    Camera13m97° FOVEffective rangeIR range (0m)

    Night Vision Performance

    Daytime

    Full 7.1MP (3072×2304) resolution at 97° field of view. Effective identification range up to 0m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 0m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the WV-X86531-Z2

    1

    Center-ceiling mount at 2.7–3.5 m gives the most uniform coverage; corner mounts work but waste roughly 25% of the field of view on the wall.

    2

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.

    3

    Plan storage at roughly 28 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.

    Coverage geometry & DORI distances

    At a 5-metre standoff the i-PRO WV-X86531-Z2 covers about 11.3 m of scene width; at 10 m that grows to 22.6 m, and at 20 m to 45.2 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 63 m, observe up to 25 m, recognise up to 13 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 6 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the fixed wide + 4.0-84.6mm PTZ lens declared by the manufacturer.

    Detect
    63 m
    Observe
    25 m
    Recognise
    13 m
    Identify
    6 m

    Power & cabling

    The i-PRO WV-X86531-Z2 draws an estimated 12.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Panoramic / fisheye coverage almost always captures more than the controller intended — schedule a privacy mask review after install to blur out staff-only areas, neighbouring premises and any glass that admits a view of third parties.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 4–5 h of labour per panoramic camera of this class (approximately €180–€230 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the i-PRO WV-X86531-Z2 suitable for outdoor installation?

    Most panoramic units in the i-PRO catalogue are IP66/IK10 rated for outdoor use — verify the exact suffix in the model code (e.g. "-W" for weather-rated). Mount under an eave or recessed canopy where possible: direct rainfall on the dome causes droplets that distort the wide-angle image.

    What PoE class powers the i-PRO WV-X86531-Z2?

    The camera draws roughly 12.0 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the i-PRO WV-X86531-Z2 consume per day?

    At 7.1MP (3072×2304) resolution, 15 fps H.265 continuous recording, the WV-X86531-Z2 produces approximately 28 GB per day — about 840 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the i-PRO WV-X86531-Z2 identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 6 m, recognises a person up to 13 m, observes general activity up to 25 m, and detects motion up to 63 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does i-PRO WV-X86531-Z2 use?

    Typical ingest is 11 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related i-PRO Panoramic Cameras

    Other i-PRO cameras

    Helpful Tools & Resources

    Plan your layout with i-PRO WV-X86531-Z2

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install