CCTVPLANNER.IO · CAMERA · I-PRO

    i-PRO WV-X22700-V2L

    Dome Camera with 8.3MP (3840×2160) resolution, 52° field of view, and 0m IR night vision range. Features Super Low Light technology for superior night performance.

    NO.01
    8.3MP
    Resolution
    NO.02
    52°
    Horizontal FOV
    NO.03
    32m
    Effective Range
    NO.04
    0m
    IR Range

    SPECIFICATIONS · WV-X22700-V2L

    Specifications

    Resolution8.3MP (3840×2160)
    Focal Length4.3-8.6mm
    Horizontal FOV52°
    Effective Range32m
    IR Range0m
    TypeDome Camera
    Low LightYes — Super Low Light

    About the i-PRO WV-X22700-V2L

    The i-PRO WV-X22700-V2L is a tinted-bubble dome that obscures the lens direction, deterring tampering and vandalism. 4K (8MP) resolution roughly quadruples 1080p pixel density, pushing usable identification distance past 25 meters and giving forensic-grade digital zoom on archived footage. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A standard 50–80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion. Super Low Light technology pulls usable color out of scenes lit by little more than a streetlight or moonlight, eliminating the need to drop into B/W mode in most night conditions.

    Best use cases for this camera

    Entrance, lobby & vestibule

    Low-light sensitivity preserves face detail even when interior lighting is dimmed for energy savings. Useful for capturing visitors as they enter and leave.

    Retail & office interior

    Dome form factor and 8.3MP (3840×2160) resolution make this a clean retail/office choice — the housing blends into ceilings and the sensor delivers enough detail for POS-area monitoring and incident review.

    Strengths

    • 8.3MP sensor preserves detail under digital zoom on recorded footage
    • Super Low Light sensor maintains color detail in near-darkness
    • Vandal-resistant dome housing harder to tamper with than bullet form factor
    • 32m effective range supports outdoor perimeter and parking-lot deployments

    Considerations

    • No built-in IR — requires external illumination for night use
    • Higher resolution increases storage and bandwidth requirements proportionally — verify NVR capacity

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m4.9m24Entrance, corridor
    10m9.8m98Room, retail aisle
    15m14.6m219Warehouse, parking row
    20m19.5m390Parking row, courtyard
    30m29.3m878Parking lot, yard
    50m48.8m2439Perimeter, large area

    Field of View Visualization

    Camera32m52° FOVEffective rangeIR range (0m)

    Night Vision Performance

    Daytime

    Full 8.3MP (3840×2160) resolution at 52° field of view. Effective identification range up to 30m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 0m in complete darkness. Super Low Light sensor captures colour images in near-darkness.

    Installation tips for the WV-X22700-V2L

    1

    Ceiling-mount at 2.5–3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.

    2

    Plan storage at roughly 33 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.

    Coverage geometry & DORI distances

    At a 5-metre standoff the i-PRO WV-X22700-V2L covers about 4.9 m of scene width; at 10 m that grows to 9.8 m, and at 20 m to 19.5 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 158 m, observe up to 63 m, recognise up to 32 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 16 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 4.3-8.6mm lens declared by the manufacturer.

    Detect
    158 m
    Observe
    63 m
    Recognise
    32 m
    Identify
    16 m

    Power & cabling

    The i-PRO WV-X22700-V2L draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the i-PRO WV-X22700-V2L suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the i-PRO range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the i-PRO WV-X22700-V2L?

    The camera draws roughly 5.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the i-PRO WV-X22700-V2L consume per day?

    At 8.3MP (3840×2160) resolution, 15 fps H.265 continuous recording, the WV-X22700-V2L produces approximately 33 GB per day — about 990 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the i-PRO WV-X22700-V2L identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 16 m, recognises a person up to 32 m, observes general activity up to 63 m, and detects motion up to 158 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does i-PRO WV-X22700-V2L use?

    Typical ingest is 12 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related i-PRO Dome Cameras

    Other i-PRO cameras

    Helpful Tools & Resources

    Plan your layout with i-PRO WV-X22700-V2L

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install