CCTVPLANNER.IO · CAMERA · I-PRO

    i-PRO WV-S4156

    Dome Camera with 4.8MP (2192×2192) resolution, 186° field of view, and 0m IR night vision range.

    NO.01
    4.8MP
    Resolution
    NO.02
    186°
    Horizontal FOV
    NO.03
    30m
    Effective Range
    NO.04
    0m
    IR Range

    SPECIFICATIONS · WV-S4156

    Specifications

    Resolution4.8MP (2192×2192)
    Focal Length0.84mm
    Horizontal FOV186°
    Effective Range30m
    IR Range0m
    TypeDome Camera
    Low LightStandard

    About the i-PRO WV-S4156

    The i-PRO WV-S4156 is a discreet dome housing well-suited to indoor retail, office, lobby, and educational environments where aesthetics matter. At 5-to-6MP the sensor sits between 1080p economy and 4K forensic detail: enough pixels-per-metre for evidence-grade faces at typical entrance and driveway distances, while keeping recording bitrate materially lighter than an 8MP camera. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. An ultra-wide angle (>120°) captures nearly an entire scene from one position, but pixels per meter drops sharply at the edges, so identification at the periphery is limited.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 186° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Retail & office interior

    Dome form factor and 4.8MP (2192×2192) resolution make this a clean retail/office choice — the housing blends into ceilings and the sensor delivers enough detail for POS-area monitoring and incident review.

    Strengths

    • 4.8MP sensor preserves detail under digital zoom on recorded footage
    • 186° wide field of view reduces the number of cameras needed per area
    • Vandal-resistant dome housing harder to tamper with than bullet form factor
    • 30m effective range supports outdoor perimeter and parking-lot deployments

    Considerations

    • No built-in IR — requires external illumination for night use
    • Edge distortion and reduced peripheral pixel density limit identification at the corners of the frame

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m-190.8m-954Entrance, corridor
    10m-381.6m-3816Room, retail aisle
    15m-572.4m-8587Warehouse, parking row
    20m-763.2m-15265Parking row, courtyard
    30m-1144.9m-34346Parking lot, yard
    50m-1908.1m-95406Perimeter, large area

    Field of View Visualization

    Camera30m186° FOVEffective rangeIR range (0m)

    Night Vision Performance

    Daytime

    Full 4.8MP (2192×2192) resolution at 186° field of view. Effective identification range up to 30m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 0m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the WV-S4156

    1

    Ceiling-mount at 2.5–3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.

    2

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.

    3

    Plan storage at roughly 19 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.

    Coverage geometry & DORI distances

    At a 5-metre standoff the i-PRO WV-S4156 covers about -190.8 m of scene width; at 10 m that grows to -381.6 m, and at 20 m to -763.2 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 0 m, observe up to 0 m, recognise up to 0 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 0 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 0.84mm lens declared by the manufacturer.

    Detect
    0 m
    Observe
    0 m
    Recognise
    0 m
    Identify
    0 m

    Power & cabling

    The i-PRO WV-S4156 draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. With 186° horizontal FOV and 30 m effective range, a single dome camera unit covers a large swath of scene — confirm during commissioning that no part of the visible area extends beyond the property boundary, and add a privacy mask if it does.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the i-PRO WV-S4156 suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the i-PRO range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the i-PRO WV-S4156?

    The camera draws roughly 5.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the i-PRO WV-S4156 consume per day?

    At 4.8MP (2192×2192) resolution, 15 fps H.265 continuous recording, the WV-S4156 produces approximately 19 GB per day — about 570 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the i-PRO WV-S4156 identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 0 m, recognises a person up to 0 m, observes general activity up to 0 m, and detects motion up to 0 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does i-PRO WV-S4156 use?

    Typical ingest is 7 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related i-PRO Dome Cameras

    Other i-PRO cameras

    Helpful Tools & Resources

    Plan your layout with i-PRO WV-S4156

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install