CCTVPLANNER.IO · CAMERA · HIKVISION

    Hikvision DS-2CD2543G2-I(8mm)

    Dome Camera with 3.7MP (2560×1440) resolution, 40° field of view, and 30m IR night vision range.

    NO.01
    3.7MP
    Resolution
    NO.02
    40°
    Horizontal FOV
    NO.03
    28m
    Effective Range
    NO.04
    30m
    IR Range

    SPECIFICATIONS · DS-2CD2543G2-I(8MM)

    Specifications

    Resolution3.7MP (2560×1440)
    Focal Length8mm
    Horizontal FOV40°
    Effective Range28m
    IR Range30m
    TypeDome Camera
    Low LightStandard

    About the Hikvision DS-2CD2543G2-I(8mm)

    The Hikvision DS-2CD2543G2-I(8mm) is a low-profile dome enclosure that blends into ceilings, vandal-resistant by design and harder to tamper with than bullet cameras. 4MP resolution delivers a noticeable detail upgrade over 1080p — facial identification extends to roughly 18 meters, and digital zoom on recorded footage stays usable. Medium IR range (20–40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A narrow field of view trades coverage area for pixel density at distance — the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations.

    Best use cases for this camera

    Long corridor & aisle monitoring

    The 40° narrow angle is intentionally tuned for corridor work — it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.

    Retail & office interior

    Dome form factor and 3.7MP (2560×1440) resolution make this a clean retail/office choice — the housing blends into ceilings and the sensor delivers enough detail for POS-area monitoring and incident review.

    License plate / ANPR

    The combination of 40° narrow angle and 3.7MP (2560×1440) resolution provides the pixel density required for ANPR at typical lane widths, especially when paired with proper lane lighting and perpendicular mounting.

    Strengths

    • Vandal-resistant dome housing harder to tamper with than bullet form factor
    • 80m effective range supports outdoor perimeter and parking-lot deployments

    Considerations

    • Narrow angle requires more cameras to cover wide areas — plan camera count accordingly

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m3.6m18Entrance, corridor
    10m7.3m73Room, retail aisle
    15m10.9m164Warehouse, parking row
    20m14.6m291Parking row, courtyard
    30m21.8m655Parking lot, yard
    50m36.4m1820Perimeter, large area

    Field of View Visualization

    Camera28m40° FOVEffective rangeIR range (30m)

    Night Vision Performance

    Daytime

    Full 3.7MP (2560×1440) resolution at 40° field of view. Effective identification range up to 80m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 30m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the DS-2CD2543G2-I(8mm)

    1

    Ceiling-mount at 2.5–3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.

    2

    Plan cabling for multiple cameras to cover wide areas — at 40° you cover roughly 7 m of width per camera at 10 m distance.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Hikvision DS-2CD2543G2-I(8mm) covers about 3.6 m of scene width; at 10 m that grows to 7.3 m, and at 20 m to 14.6 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 141 m, observe up to 56 m, recognise up to 28 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 14 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 8mm lens declared by the manufacturer.

    Detect
    141 m
    Observe
    56 m
    Recognise
    28 m
    Identify
    14 m

    Power & cabling

    The Hikvision DS-2CD2543G2-I(8mm) draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 4–5 h of labour per dome camera of this class (approximately €180–€230 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Hikvision DS-2CD2543G2-I(8mm) suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Hikvision range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the Hikvision DS-2CD2543G2-I(8mm)?

    The camera draws roughly 7.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the Hikvision DS-2CD2543G2-I(8mm) consume per day?

    At 3.7MP (2560×1440) resolution, 15 fps H.265 continuous recording, the DS-2CD2543G2-I(8mm) produces approximately 15 GB per day — about 450 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the Hikvision DS-2CD2543G2-I(8mm) identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 14 m, recognises a person up to 28 m, observes general activity up to 56 m, and detects motion up to 141 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does Hikvision DS-2CD2543G2-I(8mm) use?

    Typical ingest is 6 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related Hikvision Dome Cameras

    Other Hikvision cameras

    Helpful Tools & Resources

    Plan your layout with Hikvision DS-2CD2543G2-I(8mm)

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install