CCTVPLANNER.IO · CAMERA · EZVIZ

    Ezviz C1C-D0-1D1WFR

    Bullet Camera with 0.9MP (1280×720) resolution, 92° field of view, and 0m IR night vision range.

    NO.01
    0.9MP
    Resolution
    NO.02
    92°
    Horizontal FOV
    NO.03
    5m
    Effective Range
    NO.04
    0m
    IR Range

    SPECIFICATIONS · C1C-D0-1D1WFR

    Specifications

    Resolution0.9MP (1280×720)
    Focal Length2.8mm
    Horizontal FOV92°
    Effective Range5m
    IR Range0m
    TypeBullet Camera
    Low LightStandard

    About the Ezviz C1C-D0-1D1WFR

    The Ezviz C1C-D0-1D1WFR is a rugged outdoor-grade bullet form factor designed to withstand exposure to weather, vandalism, and direct sunlight. Sub-megapixel resolution is suitable only for general overview footage — useful for movement detection but insufficient for facial recognition or license-plate reading. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 92° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Strengths

    • 92° wide field of view reduces the number of cameras needed per area

    Considerations

    • Resolution limits forensic digital zoom — recorded faces beyond ~12m may not be identifiable
    • No built-in IR — requires external illumination for night use

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m10.4m52Entrance, corridor
    10m20.7m207Room, retail aisle
    15m31.1m466Warehouse, parking row
    20m41.4m828Parking row, courtyard
    30m62.1m1864Parking lot, yard
    50m103.6m5178Perimeter, large area

    Field of View Visualization

    Camera5m92° FOVEffective rangeIR range (0m)

    Night Vision Performance

    Daytime

    Full 0.9MP (1280×720) resolution at 92° field of view. Effective identification range up to 30m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 0m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the C1C-D0-1D1WFR

    1

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Ezviz C1C-D0-1D1WFR covers about 10.4 m of scene width; at 10 m that grows to 20.7 m, and at 20 m to 41.4 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 24 m, observe up to 10 m, recognise up to 5 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 2 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 2.8mm lens declared by the manufacturer.

    Detect
    24 m
    Observe
    10 m
    Recognise
    5 m
    Identify
    2 m

    Power & cabling

    The Ezviz C1C-D0-1D1WFR draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Ezviz C1C-D0-1D1WFR suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Ezviz range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the Ezviz C1C-D0-1D1WFR?

    The camera draws roughly 5.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the Ezviz C1C-D0-1D1WFR consume per day?

    At 0.9MP (1280×720) resolution, 15 fps H.265 continuous recording, the C1C-D0-1D1WFR produces approximately 4 GB per day — about 120 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the Ezviz C1C-D0-1D1WFR identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 2 m, recognises a person up to 5 m, observes general activity up to 10 m, and detects motion up to 24 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does Ezviz C1C-D0-1D1WFR use?

    Typical ingest is 2 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related Ezviz Bullet Cameras

    Other Ezviz cameras

    Helpful Tools & Resources

    Plan your layout with Ezviz C1C-D0-1D1WFR

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install