CCTVPLANNER.IO · CAMERA · AXIS
Axis AXIS Q1941-E 60mm
Bullet Camera with 0.1MP (384×288) resolution, 7° field of view, and 0m IR night vision range.
SPECIFICATIONS · AXIS Q1941-E 60MM
Specifications
About the Axis AXIS Q1941-E 60mm
The Axis AXIS Q1941-E 60mm is a long-distance bullet body that mounts cleanly under eaves, on poles, or along fencelines. Sub-megapixel resolution is suitable only for general overview footage — useful for movement detection but insufficient for facial recognition or license-plate reading. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A narrow field of view trades coverage area for pixel density at distance — the right choice when you need to read faces or plates far from the camera, e.g., long corridors, gate approaches, ANPR installations.
Best use cases for this camera
Long corridor & aisle monitoring
The 7° narrow angle is intentionally tuned for corridor work — it concentrates pixel density along the length of the hallway rather than wasting resolution on the side walls. Mount at the far end facing along the corridor.
Strengths
Considerations
- •Resolution limits forensic digital zoom — recorded faces beyond ~12m may not be identifiable
- •No built-in IR — requires external illumination for night use
- •Narrow angle requires more cameras to cover wide areas — plan camera count accordingly
Coverage at Different Distances
| Distance | Coverage Width | Coverage Area | Use Case |
|---|---|---|---|
| 5m | 0.6m | 3 m² | Entrance, corridor |
| 10m | 1.2m | 12 m² | Room, retail aisle |
| 15m | 1.8m | 28 m² | Warehouse, parking row |
| 20m | 2.4m | 49 m² | Parking row, courtyard |
| 30m | 3.7m | 110 m² | Parking lot, yard |
| 50m | 6.1m | 306 m² | Perimeter, large area |
Field of View Visualization
Night Vision Performance
Daytime
Full 0.1MP (384×288) resolution at 7° field of view. Effective identification range up to 400m in good lighting conditions.
Nighttime (IR)
Built-in IR LEDs illuminate up to 0m in complete darkness. Switches to B/W mode for clear night footage.
Installation tips for the AXIS Q1941-E 60mm
Plan cabling for multiple cameras to cover wide areas — at 7° you cover roughly 1 m of width per camera at 10 m distance.
Coverage geometry & DORI distances
At a 5-metre standoff the Axis AXIS Q1941-E 60mm covers about 0.6 m of scene width; at 10 m that grows to 1.2 m, and at 20 m to 2.4 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 138 m, observe up to 55 m, recognise up to 28 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 14 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 60mm lens declared by the manufacturer.
Power & cabling
The Axis AXIS Q1941-E 60mm draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.
Privacy & legal (GDPR / RODO)
Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.
Installer time & cost (rough estimate)
A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.
Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.
Frequently asked questions
Is the Axis AXIS Q1941-E 60mm suitable for outdoor installation?
Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Axis range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).
What PoE class powers the Axis AXIS Q1941-E 60mm?
The camera draws roughly 5.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.
How much storage does the Axis AXIS Q1941-E 60mm consume per day?
At 0.1MP (384×288) resolution, 15 fps H.265 continuous recording, the AXIS Q1941-E 60mm produces approximately 2 GB per day — about 60 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.
Up to what distance can the Axis AXIS Q1941-E 60mm identify a person?
Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 14 m, recognises a person up to 28 m, observes general activity up to 55 m, and detects motion up to 138 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.
What network bandwidth does Axis AXIS Q1941-E 60mm use?
Typical ingest is 2 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.
Related Axis Bullet Cameras
Other Axis cameras
Helpful Tools & Resources
Free CCTV Design Tool
Plan a full camera layout online — no download, free to start
Camera Placement Tool
Position cameras on a real floor plan and see live DORI coverage
FOV Calculator
Calculate field of view for any focal length
Storage Calculator
Estimate HDD requirements for your setup
Camera Quantity Calculator
Find out how many cameras you need
Field of View Explained
Understand HFOV, VFOV, and lens selection
Camera Placement Guide
Best practices for positioning cameras
All Features
See everything CCTVplanner can do
Plan your layout with Axis AXIS Q1941-E 60mm
Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.
Free until you outgrow it · No card · No install