CCTVPLANNER.IO · CAMERA · AXIS

    Axis AXIS P3354

    Dome Camera with 1.2MP (1280×960) resolution, 100° field of view, and 0m IR night vision range.

    NO.01
    1.2MP
    Resolution
    NO.02
    100°
    Horizontal FOV
    NO.03
    25m
    Effective Range
    NO.04
    0m
    IR Range

    SPECIFICATIONS · AXIS P3354

    Specifications

    Resolution1.2MP (1280×960)
    Focal Length2.5-6mm
    Horizontal FOV100°
    Effective Range25m
    IR Range0m
    TypeDome Camera
    Low LightStandard

    About the Axis AXIS P3354

    The Axis AXIS P3354 is a tinted-bubble dome that obscures the lens direction, deterring tampering and vandalism. 720p HD resolution captures enough detail for basic identification at close range (under 8 meters) but loses face detail beyond that. There is no built-in IR illuminator on this model, so it depends entirely on ambient light. In dark environments, pair it with external IR floods or white-light illuminators. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 100° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Strengths

    • 100° wide field of view reduces the number of cameras needed per area
    • Vandal-resistant dome housing harder to tamper with than bullet form factor

    Considerations

    • Resolution limits forensic digital zoom — recorded faces beyond ~12m may not be identifiable
    • No built-in IR — requires external illumination for night use

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m11.9m60Entrance, corridor
    10m23.8m238Room, retail aisle
    15m35.8m536Warehouse, parking row
    20m47.7m953Parking row, courtyard
    30m71.5m2145Parking lot, yard
    50m119.2m5959Perimeter, large area

    Field of View Visualization

    Camera25m100° FOVEffective rangeIR range (0m)

    Night Vision Performance

    Daytime

    Full 1.2MP (1280×960) resolution at 100° field of view. Effective identification range up to 25m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 0m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the AXIS P3354

    1

    Ceiling-mount at 2.5–3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.

    2

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Axis AXIS P3354 covers about 11.9 m of scene width; at 10 m that grows to 23.8 m, and at 20 m to 47.7 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 25 m, observe up to 10 m, recognise up to 5 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 2 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 2.5-6mm lens declared by the manufacturer.

    Detect
    25 m
    Observe
    10 m
    Recognise
    5 m
    Identify
    2 m

    Power & cabling

    The Axis AXIS P3354 draws an estimated 5.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Axis AXIS P3354 suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Axis range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the Axis AXIS P3354?

    The camera draws roughly 5.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the Axis AXIS P3354 consume per day?

    At 1.2MP (1280×960) resolution, 15 fps H.265 continuous recording, the AXIS P3354 produces approximately 5 GB per day — about 150 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the Axis AXIS P3354 identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 2 m, recognises a person up to 5 m, observes general activity up to 10 m, and detects motion up to 25 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does Axis AXIS P3354 use?

    Typical ingest is 2 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related Axis Dome Cameras

    Other Axis cameras

    Helpful Tools & Resources

    Plan your layout with Axis AXIS P3354

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install