CCTVPLANNER.IO · CAMERA · ANNKE

    Annke C500 I51DM (5MP turret 2.8mm)

    Dome Camera with 4.9MP (2560×1920) resolution, 98° field of view, and 30m IR night vision range.

    NO.01
    4.9MP
    Resolution
    NO.02
    98°
    Horizontal FOV
    NO.03
    10m
    Effective Range
    NO.04
    30m
    IR Range

    SPECIFICATIONS · C500 I51DM (5MP TURRET 2.8MM)

    Specifications

    Resolution4.9MP (2560×1920)
    Focal Length2.8mm
    Horizontal FOV98°
    Effective Range10m
    IR Range30m
    TypeDome Camera
    Low LightStandard

    About the Annke C500 I51DM (5MP turret 2.8mm)

    The Annke C500 I51DM (5MP turret 2.8mm) is a tinted-bubble dome that obscures the lens direction, deterring tampering and vandalism. At 8MP the camera covers more area per device while preserving enough pixels-per-meter for legal evidence quality at typical installation distances. Medium IR range (20–40 m) is appropriate for typical residential driveways, small commercial perimeters, and back-of-house loading bays where reach beyond ~30 m is rarely needed at night. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 98° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Retail & office interior

    Dome form factor and 4.9MP (2560×1920) resolution make this a clean retail/office choice — the housing blends into ceilings and the sensor delivers enough detail for POS-area monitoring and incident review.

    Strengths

    • 4.9MP sensor preserves detail under digital zoom on recorded footage
    • 98° wide field of view reduces the number of cameras needed per area
    • Vandal-resistant dome housing harder to tamper with than bullet form factor
    • 30m effective range supports outdoor perimeter and parking-lot deployments

    Considerations

    • No notable limitations for the intended class of installations

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m11.5m58Entrance, corridor
    10m23.0m230Room, retail aisle
    15m34.5m518Warehouse, parking row
    20m46.0m920Parking row, courtyard
    30m69.0m2071Parking lot, yard
    50m115.0m5752Perimeter, large area

    Field of View Visualization

    Camera10m98° FOVEffective rangeIR range (30m)

    Night Vision Performance

    Daytime

    Full 4.9MP (2560×1920) resolution at 98° field of view. Effective identification range up to 30m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 30m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the C500 I51DM (5MP turret 2.8mm)

    1

    Ceiling-mount at 2.5–3.5 m for indoor use; for vandal-prone outdoor locations use a wall mount with the lens facing outward and downward.

    2

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.

    3

    Plan storage at roughly 20 GB per camera per day for continuous H.265 recording at 15fps — verify NVR has sufficient HDD bay capacity.

    Coverage geometry & DORI distances

    At a 5-metre standoff the Annke C500 I51DM (5MP turret 2.8mm) covers about 11.5 m of scene width; at 10 m that grows to 23.0 m, and at 20 m to 46.0 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 51 m, observe up to 21 m, recognise up to 10 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 5 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 2.8mm lens declared by the manufacturer.

    Detect
    51 m
    Observe
    21 m
    Recognise
    10 m
    Identify
    5 m

    Power & cabling

    The Annke C500 I51DM (5MP turret 2.8mm) draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. With 98° horizontal FOV and 30 m effective range, a single dome camera unit covers a large swath of scene — confirm during commissioning that no part of the visible area extends beyond the property boundary, and add a privacy mask if it does.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the Annke C500 I51DM (5MP turret 2.8mm) suitable for outdoor installation?

    Yes for the IP66/IP67-rated variant of this model. Bullet and dome bodies in the Annke range survive direct rain, snow and UV; check the IP / IK rating against your environment (IP66 for rain/dust, IK10 for vandal-prone locations).

    What PoE class powers the Annke C500 I51DM (5MP turret 2.8mm)?

    The camera draws roughly 7.5 W in steady-state operation, requiring a 802.3af (Class 3, ≤15.4 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the Annke C500 I51DM (5MP turret 2.8mm) consume per day?

    At 4.9MP (2560×1920) resolution, 15 fps H.265 continuous recording, the C500 I51DM (5MP turret 2.8mm) produces approximately 20 GB per day — about 600 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the Annke C500 I51DM (5MP turret 2.8mm) identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 5 m, recognises a person up to 10 m, observes general activity up to 21 m, and detects motion up to 51 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does Annke C500 I51DM (5MP turret 2.8mm) use?

    Typical ingest is 7 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related Annke Dome Cameras

    Other Annke cameras

    Helpful Tools & Resources

    Plan your layout with Annke C500 I51DM (5MP turret 2.8mm)

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install