Amcrest AD410 2K Video Doorbell

SPECIFICATIONS · AD410 2K VIDEO DOORBELL

About the Amcrest AD410 2K Video Doorbell

The Amcrest AD410 2K Video Doorbell is a long-distance bullet body that mounts cleanly under eaves, on poles, or along fencelines. 5MP resolution sharpens the image well past 1080p — facial identification extends to roughly 20 meters and retroactive digital zoom on recorded footage stays crisp, without the storage and bandwidth cost of a full 4K stream. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. An ultra-wide angle (>120°) captures nearly an entire scene from one position, but pixels per meter drops sharply at the edges, so identification at the periphery is limited. Super Low Light technology pulls usable color out of scenes lit by little more than a streetlight or moonlight, eliminating the need to drop into B/W mode in most night conditions.

Best use cases for this camera

Coverage at Different Distances

Field of View Visualization

Night Vision Performance

Installation tips for the AD410 2K Video Doorbell

Coverage geometry & DORI distances

At a 5-metre standoff the Amcrest AD410 2K Video Doorbell covers about 29.0 m of scene width; at 10 m that grows to 58.1 m, and at 20 m to 116.2 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 20 m, observe up to 8 m, recognise up to 4 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 2 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the fixed lens declared by the manufacturer.

Power & cabling

The Amcrest AD410 2K Video Doorbell draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

Privacy & legal (GDPR / RODO)

Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed bullet camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

Installer time & cost (rough estimate)

A typical EU installer quotes 3–4 h of labour per bullet camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

Frequently asked questions

Related Amcrest Bullet Cameras

Other Amcrest cameras

Helpful Tools & Resources