Ajax Ajax DomeCam Mini HL (5 Mp/4 mm) Ivory

SPECIFICATIONS · AJAX DOMECAM MINI HL (5 MP/4 MM) IVORY

About the Ajax Ajax DomeCam Mini HL (5 Mp/4 mm) Ivory

The Ajax Ajax DomeCam Mini HL (5 Mp/4 mm) Ivory is a low-profile dome enclosure that blends into ceilings, vandal-resistant by design and harder to tamper with than bullet cameras. At 5-to-6MP the sensor sits between 1080p economy and 4K forensic detail: enough pixels-per-metre for evidence-grade faces at typical entrance and driveway distances, while keeping recording bitrate materially lighter than an 8MP camera. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. A standard 50–80° horizontal FOV mimics how a person sees a scene and works well for general-purpose monitoring of rooms, parking spaces, and perimeter walls without distortion. The Super Low Light sensor is the feature most installers care about for residential and parking-lot use — it preserves identification detail when older cameras lose all color and most contour.

Best use cases for this camera

Coverage at Different Distances

Field of View Visualization

Night Vision Performance

Installation tips for the Ajax DomeCam Mini HL (5 Mp/4 mm) Ivory

Coverage geometry & DORI distances

At a 5-metre standoff the Ajax Ajax DomeCam Mini HL (5 Mp/4 mm) Ivory covers about 7.7 m of scene width; at 10 m that grows to 15.3 m, and at 20 m to 30.7 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 75 m, observe up to 30 m, recognise up to 15 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 8 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 4mm lens declared by the manufacturer.

Power & cabling

The Ajax Ajax DomeCam Mini HL (5 Mp/4 mm) Ivory draws an estimated 7.5 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3af (Class 3, ≤15.4 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

Privacy & legal (GDPR / RODO)

Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. Even a narrowly-aimed dome camera can incidentally record passers-by, so the Art. 13 sign at the entry point applies regardless of how tightly the lens is framed.

Installer time & cost (rough estimate)

A typical EU installer quotes 3–4 h of labour per dome camera of this class (approximately €135–€185 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

Frequently asked questions

Related Ajax Dome Cameras

Other Ajax cameras

Helpful Tools & Resources