CCTVPLANNER.IO · CAMERA · ABUS

    ABUS IPCS84510

    PTZ Camera with 3.7MP (2560×1440) resolution, 97° field of view, and 20m IR night vision range.

    NO.01
    3.7MP
    Resolution
    NO.02
    97°
    Horizontal FOV
    NO.03
    9m
    Effective Range
    NO.04
    20m
    IR Range

    SPECIFICATIONS · IPCS84510

    Specifications

    Resolution3.7MP (2560×1440)
    Focal Length2.8-12.0mm
    Horizontal FOV97°
    Effective Range9m
    IR Range20m
    TypePTZ Camera
    Low LightStandard

    About the ABUS IPCS84510

    The ABUS IPCS84510 is a pan-tilt-zoom platform giving operators the ability to follow targets, scan large areas on auto-tour, and zoom in for identification. 4MP sits in the sweet spot for installations where storage is a concern but you still want crisper retroactive zooming during incident review. A short-range IR illuminator (≤20 m) handles entrance vestibules, indoor corridors, and small enclosed spaces. Beyond 20 meters the IR fall-off causes faces to lose detail in pure darkness. A wide 80–120° angle covers a large room or open area from a single mounting position, making it ideal for retail floors, conference rooms, and small parking lots.

    Best use cases for this camera

    Entrance, lobby & vestibule

    The 97° field of view captures the entire entrance and surrounding waiting area from a single ceiling mount. Useful for capturing visitors as they enter and leave.

    Large area patrol & target tracking

    PTZ control enables operator-initiated tracking of suspicious activity, scheduled tours of preset positions overnight, and forensic zoom into recorded footage. Best paired with a wide-angle "overview" camera that triggers the PTZ via analytics.

    Strengths

    • 97° wide field of view reduces the number of cameras needed per area
    • PTZ control enables operator-driven tracking and pre-set tours

    Considerations

    • Short IR range limits night usability to indoor or close-proximity scenarios
    • PTZ cameras only see one direction at a time — pair with a fixed overview camera to avoid blind spots

    Coverage at Different Distances

    DistanceCoverage WidthCoverage AreaUse Case
    5m11.3m57Entrance, corridor
    10m22.6m226Room, retail aisle
    15m33.9m509Warehouse, parking row
    20m45.2m904Parking row, courtyard
    30m67.8m2035Parking lot, yard
    50m113.0m5651Perimeter, large area

    Field of View Visualization

    Camera9m97° FOVEffective rangeIR range (20m)

    Night Vision Performance

    Daytime

    Full 3.7MP (2560×1440) resolution at 97° field of view. Effective identification range up to 20m in good lighting conditions.

    Nighttime (IR)

    Built-in IR LEDs illuminate up to 20m in complete darkness. Switches to B/W mode for clear night footage.

    Installation tips for the IPCS84510

    1

    Mount above 4 m on a rigid pole or wall bracket — PTZ vibrations are amplified at low mounting heights and degrade image quality during pan operations.

    2

    Pair with low-cost ambient lighting (motion-triggered LED floods) to extend usable identification distance beyond the IR limit.

    3

    Position so the most important subject (entrance, cash register, gate) is in the center third of the frame — peripheral pixel density drops with wide angles.

    Coverage geometry & DORI distances

    At a 5-metre standoff the ABUS IPCS84510 covers about 11.3 m of scene width; at 10 m that grows to 22.6 m, and at 20 m to 45.2 m. Translating those numbers through EN 62676-4 pixel-density thresholds, the camera can detect a person up to 45 m, observe up to 18 m, recognise up to 9 m, and produce identification-grade detail (the ≥250 px/m bar used by Polish and EU courts as evidentiary) up to 5 m. Effective range above the identify threshold relies on supplementary lighting or a longer-focal-length optic — the geometry above assumes the 2.8-12.0mm lens declared by the manufacturer.

    Detect
    45 m
    Observe
    18 m
    Recognise
    9 m
    Identify
    5 m

    Power & cabling

    The ABUS IPCS84510 draws an estimated 30.0 W under typical load (with the IR illuminator engaged where applicable), placing it in the 802.3at (Class 4, ≤30 W) budget. A single switch port supplies enough power without an injector. Cabling: stick to Cat6 STP for runs up to 100 m end-to-end — beyond that, add an inline PoE extender or move to fibre with a media converter at the camera end. On outdoor runs, route through ø25 PVC or PE conduit to keep the cable shielded from UV and rodents.

    Privacy & legal (GDPR / RODO)

    Any camera operating in a publicly accessible area falls under GDPR (RODO in Poland) — Art. 13 obliges the data controller to post an information sign at every entry point with controller name, DPO contact, lawful basis (typically Art. 6(1)(f) legitimate interest for property protection), purpose, and retention period. The ABUS IPCS84510's PTZ pan range can sweep into neighbouring properties or public roads; document allowed pan limits in the installation record and configure privacy masks (see ABUS's web-UI under "Privacy Mask") for any window or doorway you cannot legally surveil.

    Installer time & cost (rough estimate)

    A typical EU installer quotes 5–6 h of labour per ptz camera of this class (approximately €225–€275 excluding hardware), broken down as bracket mounting, cable termination at both ends, on-site commissioning, and a brief operator handover. Allow extra time for high mounts (>4 m), exterior installations requiring scaffolding, or sites where cable routing demands wall penetrations or conduit work.

    Indicative EU 2024-2025 pricing — actual quotes vary by region, mounting height, and site conditions. Excludes hardware, transport, permits, and VAT.

    Frequently asked questions

    Is the ABUS IPCS84510 suitable for outdoor installation?

    ABUS PTZ models are generally designed for outdoor use with IP66 ingress rating and -30°C to +60°C operating range. Mount on a rigid pole at ≥ 4 m to dampen wind-driven vibration that would degrade the live image during pan operations.

    What PoE class powers the ABUS IPCS84510?

    The camera draws roughly 30.0 W in steady-state operation, requiring a 802.3at (Class 4, ≤30 W) switch port. A single Cat6 STP cable carries both data and power up to 100 m — beyond that, add an inline extender or convert to fibre near the camera.

    How much storage does the ABUS IPCS84510 consume per day?

    At 3.7MP (2560×1440) resolution, 15 fps H.265 continuous recording, the IPCS84510 produces approximately 15 GB per day — about 450 GB per month. Motion-only or event-triggered recording typically cuts that by 40–70 % depending on scene activity. Plan NVR HDD capacity for the longest retention period required by your privacy policy or insurance contract.

    Up to what distance can the ABUS IPCS84510 identify a person?

    Per EN 62676-4:2025 pixel-density thresholds, this camera identifies (≥ 250 px/m on the target) up to about 5 m, recognises a person up to 9 m, observes general activity up to 18 m, and detects motion up to 45 m. Identification distance assumes daylight or full IR illumination on the target — at the limits of the IR cone the effective identify distance shrinks roughly 30 %.

    What network bandwidth does ABUS IPCS84510 use?

    Typical ingest is 6 Mbps for the main stream (H.265, medium scene complexity, 15 fps) plus ~0.5 Mbps for a low-resolution sub-stream used by mobile clients. For a 16-camera installation of this class, plan a 50–100 Mbps NVR uplink and a dedicated VLAN for camera traffic.

    Related ABUS PTZ Cameras

    Other ABUS cameras

    Helpful Tools & Resources

    Plan your layout with ABUS IPCS84510

    Use our free CCTV planner to place this camera on your floor plan, see real-time field of view coverage, and generate a professional PDF report.

    Free until you outgrow it · No card · No install