What's the difference between door sensors and window contacts?

Door sensors typically use magnetic contacts for standard door frame mounting. Window contacts (also called window sensors) fit smaller openings and can include glass break detection. Both send open/closed status to the alarm panel and integrate with your NVR system.

Can I mix wireless and hardwired access control?

Yes. Wireless systems work well for retrofit installations and areas where running cables is difficult. Hardwired systems are preferred for new construction and areas requiring 100% reliability. Most modern systems support hybrid deployments with separate VLANs for each type.

How does access control integrate with CCTV?

The two systems share network infrastructure (PoE, Ethernet, VLAN planning) and can be triggered together: when an access control event occurs, the NVR can automatically start recording that area or increase frame rate. Both connect to the same network switch and can share power and cable management.

KONTROLA PRISTOPA · CCTVPLANNER

Oblikujte sisteme varnosti vrat in oken

Načrtujte razpored kontrole pristopa, ki se integrira s CCTV, omrežjem in zahtevami skladnosti. Senzorji vrat, stični elementi oken, brezžični sistemi in izolacija VLAN — vse v enem orodju za oblikovanje.

Ogled vzorčnega projekta

ŠEST SPOSOBNOSTI · INTEGRIRANO OBLIKOVANJE

Popolno načrtovanje kontrole pristopa

Door Sensor Layout

Plan magnetic contacts, mechanical switches, and wireless door sensors with proper placement and coverage validation.

Window Protection

Design window contact sensor layouts for perimeter protection with glass break detection and vibration sensors.

Wireless Systems

Configure wireless access control systems from leading manufacturers with battery monitoring and signal coverage.

VLAN Isolation

Plan separate VLANs for access control systems to isolate traffic from cameras and management networks.

Compliance Validation

Validate designs against regional compliance frameworks: GDPR, HIPAA, PCI-DSS, and industry-specific standards.

Integration Planning

Plan integration points between access control, CCTV, intrusion detection, and NVR systems on shared network infrastructure.

KDO GA UPORABLJA

Kontrola pristopa za vsako okolje

Retail Stores

Protect employee areas, stock rooms, and cash handling zones with integrated door sensors and CCTV.

Office Buildings

Secure restricted areas, server rooms, and executive offices with card readers and sensor monitoring.

Hospitals & Healthcare

Comply with HIPAA while protecting pharmacy, operating theaters, and patient record areas.

Warehouses

Control access to valuable inventory, loading docks, and restricted sections with sensor verification.

Banks & Finance

Integrate access control with CCTV and intrusion detection for PCI-DSS and vault compliance.

Education

Plan safe campus access with emergency lockdown integration and visitor management.

Sorodne varnostne discipline

CCTVplanner je celovita platforma za zasnovo varnostnih sistemov. Oglejte si druge discipline, ki jih pokriva isto platno projekta.

Začnite s projektiranjem sistemov varnostne kontrole pristopa

Načrtujte senzorje vrat, stične elemente oken, brezžične sisteme in integracijo omrežja. Nato izvozite svoj načrt kot DXF, CSV ali PDF za predstavitve strankam.