Why should I separate security systems into different VLANs?

VLAN separation (network segmentation) prevents compromised cameras from accessing access control panels or management systems. If an attacker gains access to the camera network, VLANs block them from reaching other critical systems. This is required by most compliance frameworks.

How much power do my cameras need? Can my switch handle it?

PoE power varies by camera type: HD cameras use 5-10W, 4K cameras use 15-30W, and thermal/PTZ cameras can use 50-95W. You must ensure your PoE switch can deliver the total power budget and support all devices simultaneously. CCTVplanner calculates this automatically.

Do I need a UPS for my security system?

Yes. A UPS keeps cameras, switches, and NVRs running during power outages so monitoring continues. Size the UPS to handle your total device load for at least 4-24 hours depending on your requirements. Calculate total power consumption including all devices simultaneously.

NETWORK PLANNING · CCTVPLANNER

Design Network Infrastructure for Security Systems

Plan IP addressing, VLAN segmentation, PoE budgets, UPS sizing, cable routing, and network configuration. Design secure, scalable networks for CCTV, access control, and intrusion detection systems.

SIX CAPABILITIES · COMPLETE INFRASTRUCTURE

Complete Network Planning

IP Addressing & Subnets

Plan IP ranges for cameras, NVRs, access control panels, and management systems. Automatic VLAN assignment and conflict detection.

VLAN Segmentation

Isolate camera traffic, access control, and management networks to prevent lateral movement and meet compliance requirements.

PoE Budget Analysis

Calculate total power consumption across cameras, access control readers, sensors, and other PoE devices. Validate switch and cable capacity.

UPS Sizing & Load

Plan UPS systems to support cameras, NVRs, network switches, and backup duration requirements. Calculate runtime for different load scenarios.

Cable Routing & Trenches

Plan conduit sizing, cable runs, trench layouts, and cable management. Monitor conduit fill percentage and compliance with NEC/BS standards.

Configuration Export

Export network configurations for Mikrotik, Cisco IOS, DHCP, and DNS. Auto-generate firewall rules for VLAN isolation.

WHO USES IT

Network Planning for Every Scale

Multi-Site Networks

Design IP schemes and VLANs across multiple locations with consistent addressing and security policies.

Enterprise Systems

Plan large-scale network infrastructure with thousands of devices, redundancy, and disaster recovery considerations.

Compliance Networks

Design networks meeting HIPAA, PCI-DSS, GDPR, and other standards with proper VLAN isolation and data retention.

Industrial Facilities

Plan networks in harsh environments with proper cable protection, UPS redundancy, and extended runtime requirements.

Data Center & Cloud

Integrate on-premise security systems with cloud-based monitoring, bandwidth planning, and failover scenarios.

Network Integration

Plan coexistence with existing network infrastructure, WAN optimization, and bandwidth management.

Các ngành an ninh liên quan

CCTVplanner là một nền tảng thiết kế an ninh toàn diện. Khám phá các lĩnh vực khác được đề cập trong cùng một khung dự án.

Start Planning Your Security Network

Design IP schemes, VLAN layouts, PoE budgets, and UPS sizing. Export configurations for your network devices and visualize cable routes.