Side-by-side comparison · cross brand

    Pelco SRXE4-4V22-EBT-IR1 vs Vivotek IB9371-EHT-LR

    Spec-by-spec comparison of two bullet camera models, with EN 62676-4 lens math and design recommendations.

    Specification side-by-side

    Pelco SRXE4-4V22-EBT-IR1Vivotek IB9371-EHT-LR
    ManufacturerPelcoVivotek
    Form factorBullet CameraBullet Camera
    Resolution3.7MP (2560×1440)3.1MP (2048×1536)
    Focal length9-22mm12-40mm
    Horizontal FOV36°30°
    Effective range80 m80 m
    IR distance70 m60 m
    Low-light / ColorVuYesStandard

    Verdict

    Pelco SRXE4-4V22-EBT-IR1 captures more pixel detail (3.7 MP vs 3.1 MP), useful for license-plate or face identification at distance. Pelco SRXE4-4V22-EBT-IR1 ships a low-light / ColorVu sensor — better in mixed-light retail or city-street scenes.

    Frequently asked questions

    Is Pelco SRXE4-4V22-EBT-IR1 better than Vivotek IB9371-EHT-LR?

    Pelco SRXE4-4V22-EBT-IR1 captures more pixel detail (3.7 MP vs 3.1 MP), useful for license-plate or face identification at distance. Pelco SRXE4-4V22-EBT-IR1 ships a low-light / ColorVu sensor — better in mixed-light retail or city-street scenes. For installation-specific advice — mounting height, tilt, obstacle shadowing, BOM and PoE budget — drop both cameras into CCTVplanner and the FOV cones, DORI rings (per EN 62676-4) and cable schedule render in real time on a satellite map or imported floor plan.

    What is the field of view of Pelco SRXE4-4V22-EBT-IR1 vs Vivotek IB9371-EHT-LR?

    Pelco SRXE4-4V22-EBT-IR1 has a 36° horizontal FOV at 9-22mm. Vivotek IB9371-EHT-LR has a 30° horizontal FOV at 12-40mm. Pelco covers a wider scene at the same distance; the FOV calculator on CCTVplanner converts these into linear meters of coverage at any chosen target distance.

    Which camera has stronger IR illumination?

    Pelco SRXE4-4V22-EBT-IR1 reaches 70 m of IR illumination versus 60 m for Vivotek IB9371-EHT-LR. The further-reaching IR camera is the better fit for unlit yards, parking perimeters and warehouses without permanent lighting.

    Can I plan a project mixing Pelco and Vivotek cameras?

    Yes. CCTVplanner is multi-vendor by design — drop Pelco and Vivotek cameras on the same canvas, share the same EN 62676-4 lens math and DORI ring overlays, and consolidate them into one BOM with cable schedule and PoE budget. Vendor design tools (Axis Site Designer, Hikvision HiTools, Dahua Project Design Tool, i-PRO SDT) cannot do this because each speaks only its own catalog.

    Test both cameras in your project

    Drop Pelco SRXE4-4V22-EBT-IR1 and Vivotek IB9371-EHT-LR on a real satellite map or imported floor plan. See live FOV cones, DORI rings, BOM and cable schedule in seconds.

    © 2026 CCTVplanner. All rights reserved.