Side-by-side comparison · cross brand

    Axis AXIS Q1786-LE-29 vs Pelco SRXE4-4V22-EBT-IR1

    Spec-by-spec comparison of two bullet camera models, with EN 62676-4 lens math and design recommendations.

    Specification side-by-side

    Axis AXIS Q1786-LE-29Pelco SRXE4-4V22-EBT-IR1
    ManufacturerAxisPelco
    Form factorBullet CameraBullet Camera
    Resolution3.7MP (2560×1440)3.7MP (2560×1440)
    Focal length10.9-29mm9-22mm
    Horizontal FOV33°36°
    Effective range80 m80 m
    IR distance60 m70 m
    Low-light / ColorVuYesYes

    Verdict

    Both cameras offer comparable specs on paper. The choice typically comes down to vendor lock-in, NDAA compliance and existing VMS integrations rather than raw imaging numbers.

    Frequently asked questions

    Is Axis AXIS Q1786-LE-29 better than Pelco SRXE4-4V22-EBT-IR1?

    Both cameras offer comparable specs on paper. The choice typically comes down to vendor lock-in, NDAA compliance and existing VMS integrations rather than raw imaging numbers. For installation-specific advice — mounting height, tilt, obstacle shadowing, BOM and PoE budget — drop both cameras into CCTVplanner and the FOV cones, DORI rings (per EN 62676-4) and cable schedule render in real time on a satellite map or imported floor plan.

    What is the field of view of Axis AXIS Q1786-LE-29 vs Pelco SRXE4-4V22-EBT-IR1?

    Axis AXIS Q1786-LE-29 has a 33° horizontal FOV at 10.9-29mm. Pelco SRXE4-4V22-EBT-IR1 has a 36° horizontal FOV at 9-22mm. Pelco covers a wider scene at the same distance; the FOV calculator on CCTVplanner converts these into linear meters of coverage at any chosen target distance.

    Which camera has stronger IR illumination?

    Pelco SRXE4-4V22-EBT-IR1 reaches 70 m of IR illumination versus 60 m for Axis AXIS Q1786-LE-29. The further-reaching IR camera is the better fit for unlit yards, parking perimeters and warehouses without permanent lighting.

    Can I plan a project mixing Axis and Pelco cameras?

    Yes. CCTVplanner is multi-vendor by design — drop Axis and Pelco cameras on the same canvas, share the same EN 62676-4 lens math and DORI ring overlays, and consolidate them into one BOM with cable schedule and PoE budget. Vendor design tools (Axis Site Designer, Hikvision HiTools, Dahua Project Design Tool, i-PRO SDT) cannot do this because each speaks only its own catalog.

    Test both cameras in your project

    Drop Axis AXIS Q1786-LE-29 and Pelco SRXE4-4V22-EBT-IR1 on a real satellite map or imported floor plan. See live FOV cones, DORI rings, BOM and cable schedule in seconds.

    © 2026 CCTVplanner. All rights reserved.