How many zones do I need in my alarm system?

A typical 3-bedroom home with 2 entries, garage, smoke detection, and panic needs around 11-13 zones. Multiply by ~1.5 for commercial properties. Each bedroom should be its own zone so 'night mode' can keep bedroom PIRs bypassed while perimeter stays armed. Use the calculator above for property-specific numbers.

What's the difference between an alarm zone and a partition?

A zone is a single sensor input (door contact, PIR, smoke detector). A partition is a group of zones that arm/disarm together. Homes usually have 1 partition (the whole house). Commercial sites split into partitions per area — office partition, warehouse partition, server-room partition — so each section can be armed independently.

Should I put each window on its own zone?

No — group window contacts by facade (front, back, left, right). One zone per side keeps the panel input count manageable while still telling responders which side of the building was breached. If the panel has spare capacity and the property is high-value (>€500k contents), per-window zoning becomes worthwhile.

Do 24-hour zones count against my panel capacity?

Yes — smoke detectors, panic buttons, and tamper switches each occupy a zone input, but they're configured as 24-hour zones (always armed regardless of system state). Budget for at least 3 zones beyond your user-arming zones (smoke + panic + tamper).

Which alarm panel should I buy for X zones?

Entry-level panels (SATEL VERSA 5/10, IDS X16) handle up to ~8 zones. Mid-range (SATEL VERSA 15, IDS X64) up to 16. SATEL INTEGRA 32 / IDS X128 handle 32. For 64+ zones or Grade 3 EN 50131 compliance, step up to INTEGRA 64 Plus or INTEGRA 128. The calculator above recommends a tier based on your inputs.

Calcolatore delle zone di allarme

Quante zone dovresti cablare e quale livello di quadro elettrico si adatta senza sprecare capacità?

✓ Questo calcolatore è gratuito - Nessuna carta di credito richiesta

Tipo di proprietà

camere da letto: 3

Porte d'ingresso (anteriore, posteriore, garage): 2

Facciate di finestre per proteggere: 2

1 zona per lato: fronte, retro, lati. Casa tipica: 2 (fronte + retro).

Pavimenti: 1

Configurazione consigliata

Numero totale di zone necessarie

Partizioni consigliate: 1 (sezioni armabili indipendentemente)

Zona suddivisa

Per camera da letto (braccio notturno)3

Per porta d'ingresso2

Per finestra2

Movimento interno (per piano × 2)2

Movimento del garage1

Rilevamento fumo (24 ore su 24)1

Pulsante antipanico (24 ore su 24)1

Manomissione (24 ore, obbligatoria)1

Livello di pannello consigliato

Pannello di controllo di fascia media (16 zone)

SATEL VERSA 15, IDS X64, Bosch B8512G

3 zone di riserva disponibili (pannello zona 16 )

Riporta queste zone sulla planimetria.

Trascina sensori, contatti e pulsanti antipanico nella stessa area di lavoro del progetto: la BOM li aggrega automaticamente nel pannello consigliato.

Calcolatore delle zone di allarme

Configurazione consigliata

Articoli Correlati

Riporta queste zone sulla planimetria.